讨论中间罐内钢液流动的数学模型、边界条件、求解方法,综述国内外用数学模拟法研究各种中间罐冶金技术对钢液流场的影响,提出进一步研究的发展方向.
参考文献
[1] | 王建军;包燕平;曲英.中间包冶金学[M].北京:冶金工业出版社,2001 |
[2] | T Debroy;J A Sycherz.Metall[J].Trans,1985:497. |
[3] | Y He;Y Sahai.Metall[J].Trans,1987:81. |
[4] | 程乃良,朱苗勇,肖泽强.非等温双流连铸中间包内钢液的流动与传热特征[J].钢铁,2001(10):23-25. |
[5] | 彭世恒 .中间包等温和非等温过程的基础研究和数值模拟[D].中南大学,2000. |
[6] | Han- Jürgen Odenthal .Ralf Bolling and Herbert Pfeifer[J].Nuclear Physics A,2003,74 |
[7] | Dipak Mazumdar;Roderick I L .GUTHRIE. The Physical and Mathematical Modelling of Continuous Casting Tundish Systems[J].ISIJ International,1999,39(06):524-547. |
[8] | Rajev Kumar Singh;Amitava Paul;A K Ray .Modelling of flow behaviour in cotinuous cating tundish[J].Scandinavian Journal of Metallurgy,2003,32:137-146. |
[9] | 郭鸿志.传输过程数值模拟[M].北京:冶金工业出版社,1998 |
[10] | PHOENICS/POLIS/Lectures/Turbulence Models[Z]. |
[11] | O.J.Ilegbusi .[J].ISIJ International,34:732-738. |
[12] | M Brunet .IRSID private communication[Z].,1998. |
[13] | P. Gardin;M. Brunet;J.F. Domgin .An experimental and numerical CFD study of turbulence in a tundish container[J].Applied mathematical modelling,2002(2):323-336. |
[14] | 朱苗勇;萧泽强 .连铸中间包内三维流动的数学模拟[J].东北大学学报(自然科学版),1995,16(04) |
[15] | 姚征,陈康民.CFD通用软件综述[J].上海理工大学学报,2002(02):137-144. |
[16] | A. RAMOS-BANDERAS;R. D. MORALES;L. GARCIA-DEMEDICES .Mathematical Simulation and Modeling of Steel Flow with Gas Bubbling in Trough Type Tundishes[J].ISIJ International,2003(5):653-662. |
[17] | Lino Garcia-Demedices;Rodolfo D. Morales;Simon Lopez-Ramirez .Mathematical modelling of the geometry influence of a multiple-strand tundish on the momentum, heat and mass transfer of steel flow[J].Steel Research,2001(9):346-353. |
[18] | 贺友多.传输理论和计算[M].北京:冶金工业出版社,1999 |
[19] | 朱苗勇.过程冶金中的CFD应用[J].华东冶金学院学报,1997(03):222-226,247. |
[20] | S Joo;R I L .Guthrie. Can. Met[J].Quarterly,1991,30(04):261-269. |
[21] | O J Ilebusi;J Szekely .Effect of magnetic field on flow temperature and inclusion removel in shallow tundishes[J].ISIJ International,1989,29:1031-1045. |
[22] | D. J. de Kock;K. J. Craig;C. A. Pretorius .Mathematical maximization of minimum residence time for two strand continuous caster[J].Ironmaking & Steelmaking: Products and applications,2003(3):229-234. |
[23] | 黄晔;叶树峰.渣层厚度和出流口形状对汇流旋涡下渣的影响[J].钢铁研究学报,1995(06):9-14. |
[24] | J A Snyman;A M HAY .Comput[J].Journal of Applied Mathematics,2002,44:1589-1598. |
[25] | N STANDER;K J CRAIG.LS - OPT user's manual[M].Livermoer,CA,USA,Lvermore Software Technology Corp,2002 |
[26] | 贺友多;Y Sahai .不同因素对连铸机中间包流场的影响[J].金属学报,1989,25(04):272-276. |
[27] | 于学斌,颜克权,周继刚.非对称型多流中间包的解析[J].炼钢,1999(06):44. |
[28] | 钟良才,张立,黄耀文,杨时标,朱英雄,姜茂发.湍流控制装置的结构对中间包流体流动特性的影响[J].钢铁研究学报,2002(04):6-9. |
[29] | 张兴中;刘贵玉 .水平连铸过程热平衡实测与分析[J].钢铁研究学报,1994,6(02):27-34. |
[30] | 张广庆;金山同 .隧道式感应加热中间包钢液流动状态的数学模拟[J].北方工业大学学报,1998,10(01):36-42. |
[31] | 张明华.中间包采用气体净化除去钢中夹杂物的研究[J].炼钢,1995(03):30. |
[32] | A. RAMOS-BANDERAS;R. D. MORALES;L. GARCIA-DEMEDICES .Mathematical Simulation and Modeling of Steel Flow with Gas Bubbling in Trough Type Tundishes[J].ISIJ International,2003(5):653-662. |
[33] | 吴晓东;刘青.炼钢厂连中间包钢水温度的研究[J].钢铁,2001(08) |
[34] | D .Y;Sheng,L .[J].Jonsson Met Trans B,1999,30 B:979-987. |
[35] | 王建军,戴朝珊,周俐,李正邦,肖泽强.钢水密度对中间包流场的影响的数模研究[J].华东冶金学院学报,1997(04):347-351. |
[36] | 朱苗勇 .连铸中间包内钢液流动与传热耦合过程的计算机模拟[J].金属学报,1997,33(09) |
[37] | Morales,R.D;Barreto - Sandoval,J.dt J et al.[J].Metallurgical and Materials Transactions,2000,31B:1505-1515. |
[38] | Barreto - Sandoval,J.de J;Barron - Meza,M.A;Morales,R.D .[J].ISIJ International,1996,36:543-552. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%