讨论了一些钢种用硅脱氧和用铝脱氧对钢质量的影响,以及用铝脱氧时,铝含量的高低对钢质量的影响.
参考文献
[1] | 卢盛意.用硅代替铝脱氧来消除连铸水口堵塞[J].炼钢,2004(06):32-36. |
[2] | Mark Adjei-Sarpong;Eugene Pretorius;Helmut Oltmann.Cost and operational benefits of replacing Al with Si as the primary deoxidant in the production of low O and S steel[A].,2002:441-458. |
[3] | Robert Christopher Nunnington;Neil Scuteliffe.The steelmaking and casting of Ti stabilized stainless steels[A].,2001:361-394. |
[4] | 何会琴,李碧春.钒氮钢连铸坯质量控制[J].连铸,2006(05):16-18. |
[5] | 赵长亮,孙彦辉,田志红,蔡开科.CSP生产Q235B钢的热塑性研究[J].连铸,2006(05):1-3. |
[6] | H T Tsai;H Yin;M Lowry;S.Morales.Analysis on Transverse Corner Cracks on Slabs and Countermeasures[A].AIST,Warrendale,PA,2005:201-208. |
[7] | Jennifer A. Garrison;John G. Speer;Steven W. Thompson .Aluminum and Vanadium Competition for Nitrogen in Thin Slab Processing[J].Iron & Steel Technology,2006(9):43-51. |
[8] | E T Turkdogan.Causes and Effects of Nitride and Carbonitride Precipitation During Continuous Casting[J].I&SM,1989:61-75. |
[9] | Rian Dippenaar;SuK-Chun;E S Szekeres.Strand Surface Cracks--The Role of Abnormally Large Prior Austenite Grains[A].,2006:833-843. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%