基于凝固一传热学基本理论,建立板坯连铸三维凝固传热数学模型.该模型考虑了组元成分、固相分数、温度等因素对热物性参数的影响,根据糊状区溶质传输和反扩散理论,采用钢中多组元成分的百分含量计算液、固相线温度.以鞍钢第一炼钢厂厚板坯连铸机为对象,根据二冷区铸坯表面实际水流密度分布和辊子接触传热建立边界条件,计算整个铸坯任意点、线、面的温度及固相分数分布.多钢种多拉速条件下铸坯表面温度实测值和射钉实验结果与计算值吻合良好.
参考文献
| [1] | Birrnacombe J k;Cramb A W.Steelmaking,casting and medeling[A].Toronto:Iron & Steel Society,1992:211-223. |
| [2] | 李东辉,邱以清,刘相华,王国栋.连铸凝固传热过程的数值模拟[J].铸造技术,2004(07):529-531. |
| [3] | 蔡开科.连铸坯中心缺陷的控制[C].现代连铸技术进展（第7届全国连铸学术年会：论文专辑）,2003:73-100. |
| [4] | Lei Zhang;Houfa Shen;Tianyou Huang;Baicheng Liu .Analysis of heat transfer and thermal stress in continuous casting with mechanical reduction[J].International Journal Cast Metals Research,2002(4):355-359. |
| [5] | Schneider M C;Beckermann C .Formation of macrosegregation by muhicomponent thermosolutal during the solidification of steel[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1995,26A:2373-2388. |
| [6] | MA Chang-wen;SHEN Hou-fa;HUANG Tian-you;LIU Biacheng .Analysis of solute redistribution and centerline segregation in continuously cast thin slab[J].China Foundry,2004,1(02):94-98. |
| [7] | El-Bealy M;Leskinen N;Fredfiksson H .Simulation of cooling conditions in secondary cooling zonas in continuous casting process[J].Ironmaking and Steelmaking,1995,22:246-255. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%