为研究等截面通道角形挤压过程中超细晶粒结构形成的机理及晶界变化过程,专门设计并熔铸了含微量Zr和B元素的Al-0.27wt%Zr-0.064wt%B合金,合金晶界上分布有大量的B2Zr细小化合物颗粒,晶内几乎没有B2Zr粒子.通过室温轧制、热锻以及随后的退火实验表明,B2Zr具有很高稳定性,且再结晶后B2Zr仍位于原变形后的位置,不随退火再结晶时新形成晶界的迁移而迁移,证明该合金可用于塑性变形时晶粒变形细化及晶界变化过程的研究.
参考文献
[1] | Segal VM. .MATERIALS PROCESSING BY SIMPLE SHEAR[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(2):157-164. |
[2] | Valiev R Z;KORZNIKOV A V;Mulyukov R R .Structure and properties of ultrafine-grained materials produced by severe plastic deformation[J].Materials Science and Engineering,1993,A168:141-148. |
[3] | Valiev RZ.;Alexandrov IV.;Islamgaliev RK. .Bulk nanostructured materials from severe plastic deformation [Review][J].Progress in materials science,2000(2):103-189. |
[4] | Terence G. Langdon;Minoru Furukawa;Minoru Nemoto;Zenji Horita .Using equal-channel angular pressing for refining grain size[J].JOM,2000(4):30-33. |
[5] | Cornwell L R;HARTWIG K T;Goforth R E.The equal channel angular extrusion process for materials processing[J].Materials Characterization,1996(37):295-300. |
[6] | F. J. Humphreys;P. B. Prangnell;J. R. Bowen;A. Gholinia;C. Harris .Developing stable fine-grain microstructures by large strain deformation[J].Philosophical transactions of the Royal Society. Mathematical, physical, and engineering sciences,1999(1756):1663-1681. |
[7] | Yoshinori Iwahashi;Jingtao Wang;Zenji Horita;Minoru Nemoto;Terence G. Langdon .Principle of equal-channel angular pressing for the processing of ultra-fine grained materials[J].Scripta materialia,1996(2):143-146. |
[8] | Terence G. Langdon;Minoru Furukawa;Zenji Horita;Minoru Nemoto .Using intense plastic straining for high-strain-rate superplasticity[J].JOM,1998(6):41-45. |
[9] | Valiev R Z;ALEXANDROV I V;ISLAMGALIEV R K.Processing and properties of nanostructured materials prepared by severe plastic deformation[A].Netherlands:Kluwer Academic Publishers,1998:121-142. |
[10] | Iwahashi Y;HORITA Z;Nemoto M et al.Investigation of microstructural evolution during equal-channel angular pressing[J].Acta Materialia,1997,45:4733-4741. |
[11] | VILLARSS P;PRINCE A;KAMOTO H.Handbook of Ternary Alloy Phase Diagrams,Volume 1, Ac-Gd[H][J].ASM International,1995:2763. |
[12] | 本溪钢铁公司第一炼钢厂.硼钢[M].北京:冶金工业出版社,1977 |
[13] | BERBON P;FURUKAWA M;Horita Z et al.Investigation of the properties of an Al-Mg-Li-Zr alloy after equal-channel angular pressing[J].Materials Science Forum,1996,217-222:1013-1018. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%