欢迎登录材料期刊网

材料期刊网

高级检索

复合材料的强化机制和强度预报一直是材料学的研究热点,因为这涉及到材料的组织设计问题.以往的研究对于金属基复合材料的强化机理有很多种说法,而且提出了大量的模型,但迄今为止缺乏一个统一而完善的理论.本文总结分析了近年来有关金属基复合材料的强化机制和一些相关的模型,并指出了这些强化机制的不足和以后的发展趋势.

参考文献

[1] 武高辉,赵永春,马森林.亚微米级Al2O3颗粒增强LD2铝合金复合材料的拉伸性能与强化机制[J].复合材料学报,1998(03):21-26.
[2] 魏建锋,宋余九.颗粒增强纯铝基复合材料的增强机制[J].稀有金属材料与工程,1994(03):17-22.
[3] 张力宁;王俊 .颗粒增强金属基复合材料强化机制的探讨[J].东南大学学报(自然科学版),1995,25(04):77-82.
[4] 克莱茵T W;威瑟斯P J;余永宁;房志刚.金属基复合材料导论[M].北京:冶金工业出版社,1996:348-350.
[5] Chad M. Landis;Robert M. McMeeking .A shear-lag model for a broken fiber embedded in a composite with a ductile matrix[J].Composites science and technology,1999(3):447-457.
[6] Nardone V C;PREWO K M .On the strength of discontinuous silicon carbide reinforced aluminum composites[J].Scripta Metallurgica et Materialia,1986,20(01):43-48.
[7] Ramakrishnan N .An analytical study on the strengthening of particulate reinforced metal matrix composites[J].Acta Materialia,1996,44(01):69-77.
[8] ROATTA A;BOLMARO R E .An Eshelby inclusion-based model for the study of stresses and plastic strain localization in metal composites I:general formulation and its application to round particles[J].Materials Science and Engineering,1997,A229:182-191.
[9] ROATTA A;BOLMARO R E .An Eshelby inclusion-based model for the study of stresses and plastic strain localization in metal composites II:fiber reinforcement and lamellar inclusions[J].Materials Science and Engineering,1997,A229:192-202.
[10] Leggoe J W;MAMMOLI A A;BUSH M B et al.Finite element modelling of deformation in particulate reinforced metal matrix composites with random local microstructure variation[J].Acta Materialia,1998,46(17):6075-6088.
[11] 樊建中;姚忠凯;李义春 等.颗粒增强铝基复合材料研究进展[J].材料导报,1997,11(03):48-51.
[12] Wu Y;LAVERNIA J .Strengthening behavior of particulate reinforced MMCs[J].Scripta Metallurgica et Materialia,1992,7(02):173-178.
[13] Evans A G;HUTCHINSON J W;McMeeking R M .Stress-strain behavior of metal matrix composites with discontinuous reinforcements[J].Scripta Metallurgica et Materialia,1991,25:3-8.
[14] ARSENAULT R J;SHI N .Dislocation due to differences between the coefficients of thermal expansion[J].Materials Science and Engineering,1986,81:175-187.
[15] ARSENAULT R J;WANG L;FENG C R .Strengthenging of composites due to microstructural changes in the matrix[J].冶金材料学报,1991,39(01):47-57.
[16] SHIBATA SHOICHI;TAYA M;Mori T et al.Dislocation punching from spherical inclusions in a metal matrix composite[J].冶金材料学报,1992,40(11):3141-3148.
[17] Dunand D C;MORTENSEN A .Dislocation emission at fibers:I,theory of longitudinal punching by thermal stresses[J].冶金材料学报,1991,39(07):1405-1416.
[18] Taya M;MORI T .Dislocations punched-out around a short fiber in a short fiber metal matrix composite subjected to uniform temperature change[J].Acta Materialia,1987,35(01):155-162.
[19] 董尚利,杨德庄,江中浩.短纤维增强铝基复合材料强化机制评述[J].材料科学与工程,2000(01):121-125,130.
[20] Ibrahim I A;MOHAMED F A;LAVERNIA E J .Particulate reinforced metal matrix composites:a review[J].Journal of Materials Science,1991,26:1137-1156.
[21] Miller W S;HUMPHREYS F J .Strengthening mechanism in particulate metal matrix composites[J].Scripta Metallurgica et Materialia,1991,25:33-38.
[22] 森本启之;岩村宏;安倍睦 等.SiC粒子强化アルミニウム复合材料の离子微细化による强化[J].日本金属学会志(日本),1994,58(08):973-979.
[23] 吴承建;陈国良;强文江.金属材料学[M].北京:冶金工业出版社,2000:282-306.
[24] Starink M J;WANG P;SINCLAIE I et al.Microstructure and strengthening of Al-Li-Cu-Mg alloys and MMCs: II modelling of yield strength[J].Acta Materialia,1999,47(14):3855-3968.
[25] MAHON G J;HOWE J M;Vasudevan A K .Microstructural development and the effect of inerfacial precipitation on the tensile properties of an aluminum/ silicon-carbide composite[J].冶金材料学报,1990,38(08):1503-1512.
[26] GOMIEROP;BRECHET Y;Louchet F et al.Microstructure and mechanical properties of 2091 Al-Li alloy -Ⅱ Mechanical properties:Yield stress and work hardening[J].冶金材料学报,1992,40(04):857.
[27] 范赋群;王震鸣;嵇醒;杨顺林.复合材料进展[M].北京:航空工业出版社,1994:17-22.
[28] 郑茂盛;赵更申;井新利 等.颗粒增强金属基复合材料的协同效应[J].材料研究学报,1995,9(01):583-586.
[29] Friend C M .The effect of matrix properties on reinforcement in short alumina fibre-aluminum metal matrix composites[J].Journal of Materials Science,1987,22:3005-3010.
[30] BAXTER WILLIAM J .The strength of metal matrix composites reinforced with randomly oriented discontinuous fibers[J].Metallurgical and Materials Transactions,1992,23:3045-3053.
[31] Termonia Y .Tensile strength of discontinuous fibre-reinforced composites[J].Journal of Materials Science,1990,25:4644-465.
[32] 赵永春,马森林.亚微米级Al<,2>O<,3p>/6061复合材料的显微组织与力学性能[C].'96中国材料研讨会论文集(材料设计与加工),1996:15~19.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%