欢迎登录材料期刊网

材料期刊网

高级检索

研究了淬火/回火热处理中淬火温度和回火时间对Ti-48Al-2Cr-0.5Mo合金晶粒细化的影响.研究表明:一定的淬火/回火热处理能将大小约为1000μm的铸态组织细化成为18~30μm的均匀双态组织;TiAl基合金的细化效果严重依赖淬火阶段的加热温度,温度升高,得到的块状组织较细,羽毛状组织体积分数减少,在两相区回火时,高温淬火组织的回火组织较细,而时间的延长,晶粒长大,但不明显.

参考文献

[1] Kim Y W .Microstructural evolution and mechanical properties of a forged gamma titanium aluminide alloy[J].Acta Materialia,1992,40(06):1121-1134.
[2] C. Mercer;W. O. Soboyejo .Hall-petch relationships in gamma titanium aluminides[J].Scripta materialia,1996(1):17-22.
[3] 唐建成,黄伯云,贺跃辉,刘文胜,周科朝.Ti-Al基合金中的Hall-Petch关系及影响因素分析[J].金属学报,2002(04):365-368.
[4] 张俊红,黄伯云,贺跃辉,刘咏,张永红.非晶晶化制备细晶TiAl基合金[J].航空材料学报,2002(04):26-30,45.
[5] Bryant J D;CHRISTODOULOU L;MAISANO J R .Effect of TiB2 additions on the colony size of near gamma titanium aluminides[J].Scripta Materialia,1990,24:33-38.
[6] HEYue-hui;LIU Ye-xiang;HUANG Bai yun et al.Grain refiner for TiAl intermetallic compounds[J].Journal of Materials Science and Technology,1994,10(03):205-208.
[7] HUANG Bai-yun;HE Yue-hui;ZHOU Ke chao.Grain refining of TiAl alloy by rapid deformation[J].Materials Science and Engineering A,1997:709.
[8] 贺跃辉;黄伯云;曲选辉 等.TiAl基合金双温热处理原理及其相变特征的研究[J].中南工业大学学报(自然科学版),1996,27(03):298-302.
[9] 谢鲲,王健农,唐建成.循环热处理细化TiAl晶粒[J].稀有金属材料与工程,1999(04):248.
[10] Wang J.N.;Xie K. .GRAIN SIZE REFINEMENT OF A TiAl ALLOY BY RAPID HEAT TREATMENT[J].Scripta materialia,2000(5):441-446.
[11] 李书江,刘自成,林均品,陈国良.快速细化低铝含量钛铝合金铸态组织的热处理工艺[J].稀有金属,2001(05):332-335.
[12] PENG Chao-qun,HUANG Bai-yun,TANG Jian-cheng.Formation of fine fully-lamellar microstructure of
[13] W. J. Zhang;E. Evangelista;L. Francesconi .Effect of prior cooling rate on the grain size of fully-lamellar TiAl-base alloy developed by tempering/quenching[J].Scripta materialia,1996(1):41-45.
[14] Zhang W J;FRANCESCONI L;Evangelista E .Novel heat treatment to develop very fine lamellar structure in cast gamma-base TiAl alloys[J].Materials Letters,1996(27):135-138.
[15] Blackburn M J;eds by Jaffe R;Promisel N E.The science technology and applications of Titanium[M].Oxford England:Pergamon Press,1970:633.
[16] Qiangfei Xia;J.N. Wang;Jie Yang .On the massive transformation in TiAl-based alloys[J].Intermetallics,2001(5):361-367.
[17] WANG Ping;VISWANATHAN G B;VASUDEVAN V K .Observation of a massive transformation from α to γ in quenched Ti-48 At. Pct Al alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1992,23:690-697.
[18] Zhang X D;DEAN T A;LORETTO M H .Phase transformation and structural morphologies of Ti-50Al-2Nb-2Mn during the heat treatment[J].Acta Materialia,1994,42(02):2035-2042.
[19] Tatsuo. Kumagai;Eiji Abe .Microstructure evolution through theα→γphase transformation in a Ti-48 at. Pct Al alloy[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1998(1):19-26.
[20] 胡光立;谢希文.钢的热处理(原理和工艺)[M].西安:西北工业大学出版社,1993:173-176.
[21] Veeraraghavan D.;Vasudevan VK. .PHASE TRANSFORMATIONS IN TWO-PHASE TIAL/TI3AL ALLOYS DURING CONTINUOUS HEATING AND COOLING, STUDIED BY ELECTRICAL RESISTIVITY MEASUREMENTS[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(0):950-956.
[22] 波特DA;伊斯特林K E.金属和合金中的相变[M].北京:冶金工业出版社,1988:4-8.
[23] Jones S A;KAUFMAN M J .Phase equilibria and transformation in intermediate titanium-aluminum alloys[J].Acta Materialia,1993,41(02):387-398.
[24] ABE E;NIINOBE K;NOBUKI M.Hightemperature phase transformation in Cr added TiAl base alloy[A].Sponsored by:Oak Ridge National Laboratory Materials Research Society,1998
[25] Zhang W J;CHEN G L;Evangelista E .Formation of α phase in the massive and feathery γ-TiAl alloys during aging in the single a field[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1999,30:2591.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%