对Rene95高温合金及TC4钛合金的激光快速成形工艺进行了较为深入的研究.研究结果发现,和Rene95高温合金相比,激光快速成形TC4钛合金的工艺条件较为苛刻,表现在粉末粒度范围狭窄,要求更高的激光功率密度,成形过程中熔覆组织易于被保护气氛中的O,N,H等杂质元素污染.但是,另一方面,工艺参数选择适当时TC4钛合金在成形过程中不易开裂,因而大尺寸、复杂形状零件的激光快速成形较易实现.
参考文献
| [1] | Abbott D H;ARCELLA F G .Laser forming titanium components[J].Current Advances in Materials and Processes,1998,153:29-31. |
| [2] | Mazumder J.;Kikuchi N.;Ghosh A.;Dutta D. .Closed loop direct metal deposition: art to part[J].Optics and Lasers in Engineering,2000(4/6):397-414. |
| [3] | Gaumann, M., -;Cleton, F;Wagniere, JD;Kurz, W., -;Henry, S .Epitaxial laser metal forming: analysis of microstructure formation[J].Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing,1999(1-2):232-241. |
| [4] | M.L. Griffith .Understanding thermal behavior in the LENS process[J].Materials & Design,1999(2/3):107-113. |
| [5] | 李延民 .激光立体成形工艺特性与显微组织研究[D].西北工业大学,2001. |
| [6] | Atwood C L;GRIFFITH M L;HARWELL L D et al.Laser spray fabrication for net-shape rapid product realization LDRD[R].Sandia Report,1999. |
| [7] | GremaudM;WAGMIERRE J D;ZRYD A et al.Laser metal forming: process fundamentals[J].Surface Engineering,1996,12(03):251-259. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%