对2Cr13不锈钢表面进行了等离子体浸没离子注入(PIII)与离子束增强沉积(IBED)复合强化处理.对强化后的试样进行了俄歇电子能谱(AES)、X光电子能谱(XPS)分析及显微硬度、摩擦磨损和耐腐蚀性能测试.结果表明,处理后的试样表面层中含有强化相TiN和CrN;与基体相比,被处理试样的显微硬度显著增大,最大增幅达80.4%;摩擦系数降至0.2～0.3,磨痕宽度最大减少了近4倍;腐蚀电位最大提高了5倍,腐蚀电流密度减少了26倍.磨损中粘着现象大大减轻,耐磨耐蚀性能得到了显著改善.
参考文献
| [1] | ONATE J I;DENNIS J K .Wear behavior of nitrogen-imolanted AISI 420 martensitic stainless steel[J].Surface and Coatings Technology,1990,42:119-121. |
| [2] | HIRVONEN J P;MAHIOUT A;RUCK D et al.Corrosion resistance of N-,Cr-or Cr+N implanted AISI 420 stainless steel[J].Surface and Coatings Technology,1995,74-75:760-764. |
| [3] | DENG Jiang-guo;MANUEL BRAUN .Tribological behavior of TiN,TixNy and TiC coatings prepared by unbalanced magnetron sputtering techniques[J].Surface and Coatings Technology,1994,70:49-56. |
| [4] | 朱蓓蒂.激光熔覆处理对2Cr13钢腐蚀疲劳寿命的影响[J].中国激光,1996(01):91. |
| [5] | Shao Tianmin;Hua Meng;Tarn Hon Yuen .Impact wear behavior of laser hardened hypoeutectoid 2Cr13 martensite stainless steel[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2003(1/6):444-455. |
| [6] | Tang BY.;Gan KY.;Yang P.;Wang XF.;Wang LP.;Wang SY.;Chu PK. .Surface modification of 2Cr13 oil pump steel by plasma immersion ion implantation-ion beam enhanced deposition (PIII-IBED)[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2002(1/2):211-214. |
| [7] | 张松,张春华,文忠,吴维,王茂才.2Cr13钢表面激光熔覆Co基合金组织及其性能[J].稀有金属材料与工程,2001(03):220-223. |
| [8] | P. K. Chu;B. Y. Tang;Y. C. Cheng .Principles and characteristics of a new generation plasma immersion ion implanter[J].Review of Scientific Instruments,1997(4):1866-1874. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%