用差示扫描量热法(DSC)研究了尼龙6(PA6)及Kevlar纤维(KF)表面改性对PA6/KF非等温结晶与熔融行为的影响.非等温结晶结果表明,KF起到成核作用,提高了基体PA6的起始结晶温度TConset和总结晶时间ttotaa,但是改性后的KF1(经己二酰氯处理,己内酰胺稳定化并阴离子接枝尼龙6的KF)的成核作用不如未改性的KF0(未改性KF)显著;非等温结晶的熔融行为表明,KF的引入使得低温峰的熔融温度和相对强度都比纯PA6的高,KF起到了成核作用,使得结晶的完善程度提高.
参考文献
| [1] | 崔新宇,周晓东,戴干策.玻璃纤维增强聚丙烯结晶动力学研究[J].华东理工大学学报(自然科学版),2001(06):639-642. |
| [2] | CAMPAY I;GOMEZ M A;MARCO C .Struture and thermal properties of blends of nylon6 and a liquid crystal copolyester[J].POLYMER,1998,39(25):6279-6283. |
| [3] | Wu SR.;Shyu SS.;Sheu GS. .KEVLAR FIBER-EPOXY ADHESION AND ITS EFFECT ON COMPOSITE MECHANICAL AND FRACTURE PROPERTIES BY PLASMA AND CHEMICAL TREATMENT[J].Journal of Applied Polymer Science,1996(9):1347-1360. |
| [4] | 刘丽,张翔,黄玉东,张志谦.芳纶纤维/环氧复合材料界面超声连续改性处理[J].航空材料学报,2003(01):49-51,62. |
| [5] | QIU W L;LUO Y J;LUO S G et al.s Melting behavior of PA6 and PA6/PE blend crystallized from amorphous state[J].Journal of Beijing Institute of Technology,1999,8(01):55-59. |
| [6] | BENTRASHID R;TESORO G C .Effects of surface-limited reaction on the properties of Kevlar fibers[J].Textile Research Journal,1990,62:1347-1360. |
| [7] | 刘新宇,秦伟,王福平.冷等离子体接枝处理对碳纤维织物/环氧复合材料界面性能的影响[J].航空材料学报,2003(04):40-43. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%