为提高TC18合金电子束焊接头的力学性能,测量焊态及4种焊后热处理的接头室温拉伸和冲击性能,并对不同热处理状态的显微组织和冲击断口进行光学和扫描电镜观察.研究表明,TC18电子束焊缝经不同热处理能够获得不同形态的晶内α.随晶内α片长径比的减小,塑性和冲击韧度提高,强度大致呈降低的趋势.TC18双重退火焊缝具有以粒状α为主,辅以适量片状α的β晶内结构,因而具有较好的强度、塑性和冲击韧度.
参考文献
[1] | MESSLER R W.Electron beam weldability of advanced titanium alloys[J].Welding Journal,1981(05):78s-84s. |
[2] | STARK L E.The strength-toughness properties of welds in plates of commercial titanium alloys[J].Welding Journal,1971(02):58s-70s. |
[3] | BORGGREEN K;WILSON I.Use of postweld heat treatments to improve ductility in thin sheets of Ti-6Al-4V[J].Welding Journal,1980(01):1s-9s. |
[4] | GREENFIELD M A;PIERCE C M.Postweld aging of a metastable beta titanium alloy[J].Welding Journal,1973(11):524s-527s. |
[5] | <大型军用运输机材料分析与选用>编委会.大型军用运输机材料分析与选用[M].北京:航空工业出版社,2005 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%