以AerMet100钢专利和AMS标准的变迁为基础,结合近年来国外AerMet100钢研究内容和材料院相关的研究工作,理出提高AerMet100钢断裂韧度研究的思路.不断提高纯洁度是AerMet100钢断裂韧度提高的重要条件之一;通过多元微量稀土元素改变杂质元素的状态和空间分布,可以有效减少杂质元素对断裂韧度的危害;热处理形成的稳定的逆转变奥氏体对断裂韧度起到积极作用.
参考文献
| [1] | HEMPHILL R M;WERT D E .High Strength High Fracture Toughness Alloy[P].US 328875,1989. |
| [2] | HEMPHILL R M;WERT D E .High Strength High Fracture Toughness Alloy[P].US 5087415,1992. |
| [3] | Steel,Bars And Forgings 3.1Cr-11.5Ni-3.5Co-1.2Mo (0.21 ～ 0.25C) Vacuum Melted,annealed[S].AMS 6532 |
| [4] | Steel,Bars And Forgings 3.1Cr-11.5Ni-13.5Co-1.2Mo (0.21-0.25C) Vacuum Melted,annealed[S].AMS 6532A |
| [5] | JOHN A T.Aircraft Landing Gear[M].Warrendale:Society of Automotive Engineers,1997 |
| [6] | HEMPHILL R M;WERT D E .High Strength High Fracture Toughness Alloy[P].US 5268044,1993. |
| [7] | KOJI Sato .Improving the Toughness of Ultrahigh Strength Steel[D].Berkeley:University of California,2002. |
| [8] | GRAVES J .H,Effect of Heat Treatment on the Mirostructure and Properties of AerMet100 Steel[D].Army Research Laboratory,1994. |
| [9] | HANDERHAN K J;GARRISON W M.Effect of rare earth additions on the mechanical properties of the secondary hardening steel AF1410[J].Scripta Metallurgica et Materialia,1988(22):409-412. |
| [10] | HANDERHAN K J;GARRISON W M;MOODY N R.A comparison of the fracture behavior of two heats of the secongdary hardening steel AF1410[J].Metallurgical and Materials Transactions,1989(20A):105-123. |
| [11] | Steel,Bars And Forgings 3.1Cr-11.5Ni-13.5Co-1.2Mo (0.21 ～0.25C) Vacuum Melted,annealed[S].AMS 6532B |
| [12] | RAGHAVAN A;MACHMEIER P M.Transmission Electron microscopy examination of hardening and toughening phenomena in AerMet100[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1993(24):1943-1955. |
| [13] | CHOONG H Y;HYUCK M L;JIN W CHAN.M2C Precipitates in isothermal tempering of high Co-Ni secongdary hardening steel[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1996(27):3466-3472. |
| [14] | RAGHAVAN AYER;P.M. MACHMEIER .Microstructural Basis for the Effect of Chromium on the Strength and Toughness of AF1410-Based High Performance Steels[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1996(9):2510-2517. |
| [15] | <金属机械性能>编写组.金属机械性能[M].北京:机械工业出版社,1984 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%