利用中间添加Ni层,在610℃保温60min工艺成功实现了SiCp/2014Al铝基复合材料的真空扩散焊接.焊接之后利用金相显微镜(OP)、扫描电镜(SEM)、电子探针(EPMA)等对焊接接头进行分析.分析表明,Ni和Al之间相互扩散形成由金属间化合物构成的中间过渡层,主要由Ni3Al//NiAl//NiAl3组成.在理论上,计算出Ni和Al元素扩散浓度与焊接温度和保温时间之间的关系,以及元素的扩散距离与焊接参数之间的关系呈抛物线形变化.
参考文献
[1] | URENA A;ESCALERA M D;GILL .Influence of interface reactions on fracture mechanisms in TIG arc-welded aluminum matrix composites[J].Composites Science and Technology,2000,60(03):613-622. |
[2] | 刘黎明,牛济泰,田艳红.激光焊接条件下SiCw/6061Al铝基复合材料界面反应研究[J].材料工程,1999(03):38-40. |
[3] | A.Urena;J.M.Gomez de Salazar;M.D.Escalera .Influence of metal-ceramic interfaces on the behaviour of metal matrix composites and their joints[J].Key engineering materials,1997(1):687-694. |
[4] | 刘卫红,孙大谦,邱小明,贾树盛,殷世强.铝基复合材料(Al2O3p/6061Al)过渡液相扩散连接[J].材料工程,2002(06):21-24. |
[5] | 许如强,邹家生,韩逸生.铝基复合材料的钎焊连接技术[J].焊接技术,2002(03):1-4. |
[6] | Liu LM.;Pan LX.;Wu L.;Zhu ML. .Studying of micro-bonding in diffusion welding joint for composite[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1/2):103-107. |
[7] | 陈永来,于利根,王华明.合金化填充材料Ni对SiCP/6061Al复合材料激光焊接焊缝显微组织的影响[J].复合材料学报,2000(04):63. |
[8] | GARCIA V H;MORS P M;SCHERER C.Kinetics of phase formation in binary thin films:the Ni/Al case[J].Acta Materialia,2002(48):1201-1206. |
[9] | LOPEZA G A;SOMMADOSSIA S;ZIEBAB P.Kinetic behaviour of diffusion-soldered Ni/Al/Ni interconnections[J].Materials Chemistry and Physics,2002(78):459-463. |
[10] | KARUNARATNE M S A;CARTER P;REED R C.On the diffusion of aluminum and titanium in the Ni-rieh Ni-Al-Ti system between 900 and 1200℃[J].Acta Materialia,2001(49):861-875. |
[11] | Zhang TH.;Wu YG.;Zhang YW.;Qian WD. .Phase transition and diffusion of Ni atoms in aluminum during implantation[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,2002(2):127-132. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%