采用OM,XRD检测了不同熔体温度和冷却速度条件下Al-8.5Fe-1.3V-1.7Si (wt%)合金的微观组织结构, 并检测了不同熔体温度下采用粉末冶金工艺制备的该合金室温力学性能.结果表明:熔体温度、冷却速率对该合金组织和性能有着明显的影响.在相同冷却条件下,熔体温度越高所得到合金的组织越细小,获得该合金最高力学性能则存在一个最佳的熔体温度;冷却速度对该合金的主要相组成起决定作用,并结合Al-Fe-V-Si合金的特性提出了该合金的熔炼工艺.
参考文献
[1] | ELLITT S R .Medium-range structural ordering in covalent amorphous solids[J].Nature,1991,354:445-452. |
[2] | BIAN Xiu-fang;Wang Weimin;Yuan Shujuan et al.Structurefactors of modified liquid Al-Si alloys[J].Science and Technology of Advanced Materials,2001,2:19-23. |
[3] | FROES F H;KIM Y W .Rapid solidification of Al,Mg and Ti[J].Journal of Matels,1987,39(08):14-21. |
[4] | SKINNER D J.The physical metallurgy of dispersion strengthened AlFeVSi alloys[A].Warrendale,USA:TheMineral,Metals & Materials Society,1988:181-197. |
[5] | MITRA S;MENELLEY T R .Temperature dependence of strain hardening in a dispersion strengthened AlFeVSi alloy[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1993,24(11):2589-2592. |
[6] | RAMAKRIAHNAN K N .Effect of vacuum degassing on mechanical properties of two rapidly solidified AlFe alloys for elevated temperature application[J].Powder Metallurgy,1993,36(04):199-206. |
[7] | SAVAGE S J .Production of rapidly solidified metals and alloy[J].Journal of Metals,1984,36(04):20-33. |
[8] | LAVERNIA E J;AYER J D;SRIVATSAN T S .Rapid solidification processing with application to aluminum alloys[J].International Materials Reviews,1992,37(01):1-44. |
[9] | 谭敦强,黎文献,肖于德,王冲.Precipitated phases and thermodynamic analysis during solidification of Al-Fe-X system at slow cooling rate[J].中国有色金属学会会刊(英文版),2003(05):1133-1136. |
[10] | 谭敦强,黎文献,肖于德,王日初,马正青,熊柏清,朱宝宏,张永安.Phase transition of Al-Fe-V-Si heat-resistant alloy by spray deposition[J].中国有色金属学会会刊(英文版),2003(03):568-573. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%