对含孔平面编织混杂铺层复合材料层合板的压缩性能进行试验研究,考察铺层比例和铺层顺序对其压缩破坏和压缩强度的影响, 然后利用点应力判据和平均应力判据进行层合板剩余压缩强度的估算.结果表明0°铺层比例的增加,提高了层合板的剩余压缩强度;(±45) 编织铺层比例在20%~25%之间有助于提高层合板的剩余压缩强度;点应力判据和平均应力判据适用于这种混杂铺层层合板的剩余压缩强度的估算.
参考文献
[1] | GANESH V K;NAIK N K .Analytical study of strength and failure behavior of plain weave fabric composites made of twisted yarns[J].Composites (A),2002,33:697-708. |
[2] | NAIK N K;KUCHIBHOTLA R.Failure behavior of plain weave fabric laminates under in-plane shear loading-effect of fabric geometry[J].Computers & Structures,1995(30):179-192. |
[3] | KELKAR A;SHENOY S;WHITCOMB J.Behavior of plain wo-ven textile composites subjected to uniaxial ten-sile loading[A]. |
[4] | ANTONIO F AVILA;PAULO C;RODRIGUES M .Plain weave woven fabric composites:correlation between micromechanical models and experiments[AIAA 2001-1568][R]. |
[5] | PANDITA Surya D;NISHU Kazuaki;VERPOEST Ignaas.Strain concentrations in woven fabric composites with holes[J].Computers & Structures,2003(59):361-368. |
[6] | 杨振宇,卢子兴,刘振国,李仲平.三维四向编织复合材料力学性能的有限元分析[J].复合材料学报,2005(05):155-161. |
[7] | 张文毅,姚振汉,姚学锋,曹艳平.编织复合材料的一种数值模型[J].工程力学,2004(03):55-60. |
[8] | WANG Jun;CHENG Xiao-quan;XU Yan-min .Failure Behavior of Plain Weave Composite with Me-chanically Fastened Bolted Joints[J].Proceedings of the China Association for science technology,2005,1(02):322-327. |
[9] | 王军;程小全;许延敏 等.平面编织复合材料单钉连接强度分析研究[J].复合材料学报,2005,22:39-44. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%