经过对超高强度钢工件高速切削加工表面质量的系统研究,发现在某种特定的切削条件下,工件表面质量将会发生显著改变.该变化不仅表现为表面特征的大幅改善,如表面粗糙度可以控制在0.4μm以下,无宏观裂纹发生等,还表现为表层及次表层显微硬度的明显提高、最大残余压应力深度的大幅增加(达到0.35 mm)以及表面耐磨性能的显著增强等.研究结果表明,合理的切削工艺将极有可能成为一种能够在获得工件结构形状与精度指标的同时,对加工表面表层、次表层的组织特性与工件使用性能产生积极影响的表面强化手段.
参考文献
| [1] | 龙震海 .面向武器难加工材料高速切削基础工艺研究[D].北京:北京理工大学,2004. |
| [2] | 高玉魁,刘天琦,殷源发,李向斌.表面完整性对30CrMnSiNi2A钢疲劳极限的影响[J].航空材料学报,2002(02):21-23. |
| [3] | 张伟;赵振业 .航空用高强度钢的表面完整性[J].航空科学技术,1996,14(03):20-22. |
| [4] | WARDANY T I;KISHAWY H A;ELBESTAWI M A .Surface integrity of die material in high speed hard machining,Part 2:microhardness and residual stress[J].Journal of Manufacturing Science and Engineering,2000,122(11):632-641. |
| [5] | N. A. Abukhshim;P. T. Mativenga;M. A. Sheikh .Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining[J].International Journal of Machine Tools & Manufacture: Design, research and application,2006(7/8):782-800. |
| [6] | Mativenga PT;Hon KKB .An experimental study of cutting forces in high-speed end milling and implications for dynamic force modeling[J].Journal of manufacturing science and engineering,2005(2):251-261. |
| [7] | T. R. Lin .Optimisation technique for face milling stainless steel with multiple performance characteristics[J].The International Journal of Advanced Manufacturing Technology,2002(5):330-335. |
| [8] | D UDZINSKI D;DEVILLEZ A;MOUFKI A et al.A review of development towards dry and high speed machining of Inconel 718 alloy[J].Internal Journal of Machine Tools & Manufacture,2004,44(09):439-456. |
| [9] | Ramesh A;Melkote SN;Allard LF;Riester L;Watkins TR .Analysis of white layers formed in hard turning of AISI 52100 steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):88-97. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%