为研究高速铣削加工表面残余应力分布,在统计试验设计指导下,使用X射线衍射/电解抛光方法对试样表层、次表层残余应力分布进行测量,得出残余应力分布曲线经验预报公式,探讨切削参数对残余压应力场特征指标的影响规律.研究结果表明,合理的高速切削工艺将在加工表面内引入类似喷丸强化效果的残余压应力场;(3,1)有理式模型与三阶多项式模型是描述高速铣削引入残余应力分布曲线的有效拟合公式;高速切削工艺参数对加工表面残余应力场的产生有直接影响,每齿进给量是决定残余压应力分布的关键因素,每齿进给量的变化将引起残余应力场形成机理的改变.
参考文献
| [1] | 高玉魁,刘天琦,殷源发,李向斌.表面完整性对30CrMnSiNi2A钢疲劳极限的影响[J].航空材料学报,2002(02):21-23. |
| [2] | 张伟;赵振业 .航空用高强度钢的表面完整性[J].航空科学技术,1996,14(03):20-22. |
| [3] | 龙震海 .面向武器难加工材料高速切削基础工艺研究[D].北京:北京理工大学,2004. |
| [4] | N. A. Abukhshim;P. T. Mativenga;M. A. Sheikh .Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining[J].International Journal of Machine Tools & Manufacture: Design, research and application,2006(7/8):782-800. |
| [5] | Ramesh A;Melkote SN;Allard LF;Riester L;Watkins TR .Analysis of white layers formed in hard turning of AISI 52100 steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):88-97. |
| [6] | DUDZINSKI D;DEVILLEZ A;MOUFKI A et al.A review of development towards dry and high speed machining of Inconel 718 alloy[J].International Journal of Machine Tools and Manufacture,2004,44(07):439-456. |
| [7] | Mativenga PT;Hon KKB .An experimental study of cutting forces in high-speed end milling and implications for dynamic force modeling[J].Journal of manufacturing science and engineering,2005(2):251-261. |
| [8] | T. R. Lin .Optimisation technique for face milling stainless steel with multiple performance characteristics[J].The International Journal of Advanced Manufacturing Technology,2002(5):330-335. |
| [9] | Patrik Dahlman;Fredrik Gunnberg;Michael Jacobson .The influence of rake angle, cutting feed and cutting depth on residual stresses in hard turning[J].Journal of Materials Processing Technology,2004(2):181-184. |
| [10] | A.L. Mantle;D.K. Aspinwall .Surface integrity of a high speed milled gamma titanium aluminide[J].Journal of Materials Processing Technology,2001(1/3):143-150. |
| [11] | Hiroyuki Sasahara;Toshiyiiki Obikawa;Takahiro Shirakashi .Prediction model of surface residual stress within a machined surface by combining two orthogonal plane models[J].International Journal of Machine Tools & Manufacture: Design, research and application,2004(7/8):815-822. |
| [12] | Kurt Jacobus;S. G. Kapoor;R. E. DeVor .Experimentation on the Residual Stresses Generated by Endmilling[J].Journal of manufacturing science and engineering,2001(4):748-753. |
| [13] | E. Capello .Residual stresses in turning. Part I: Influence of process parameters[J].Journal of Materials Processing Technology,2005(2):221-228. |
| [14] | J. Hua;R. Shivpuri;X. Cheng .Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamfer + hone cutting edge geometry[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):238-248. |
| [15] | Zheng YL;Hu XF;Sutherland JW .Application of finite deformation theory to the development of an orthogonal cutting model - Part I: Model development.[J].Journal of manufacturing science and engineering,2006(3):760-766. |
| [16] | Y. B. Guo;David W. Yen .A FEM study on mechanisms of discontinuous chip formation in hard machining[J].Journal of Materials Processing Technology,2004(0):1350-1356. |
| [17] | 高玉魁,李向斌,殷源发.超高强度钢的喷丸强化[J].航空材料学报,2003(z1):132-135. |
| [18] | 陶文铨.数值传热学[M].西安:西安交通大学出版社,2001 |
| [19] | 周泽华.金属切削原理[M].上海:上海科学技术出版社,1993 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%