对Z-pins增强2-D编织陶瓷基复合材料搭接接头在单向载荷作用下的连接性能进行了试验研究.试验结果表明Z-pins的加入能够改善2-D编织陶瓷基复合材料搭接接头的连接件能,反映在载荷-位移曲线的后半段,载荷变化出现了波动不大的起伏区域.产生此区域的原因为Z-pins从搭接接头拔出的过程中,与复合材料形成桥联,消耗了部分本该作用在开裂尖端的能量.利用有限元的方法模拟了有、无Z-pins,Z-pins在不同直径和间距下搭接接头的失效过程,并与试验结果相比较,吻合较好.
参考文献
| [1] | TAKASHI Ishikawa;TOSHIO Orgasawara .Overview of development activities of spaceplane components using NUSKCMC (CMC with continuous Si-Ti-C-O fiber)[AIAA2001-1879][R].Kyoto,Japan:AIAA,2001. |
| [2] | 汪清 .C/SiC复合材料连接接头应力与破坏形式数值分析[D].西北工业大学,2005. |
| [3] | CAWLEY J D .Joining of ceramic-matrix composites[J].Journal of American eeramie society Bulletin,1989,68(09):1619-1623. |
| [4] | ABD-EL-NABY SFM.Load distribution in two-pinned polymer composites joints[A].,1991:553-574. |
| [5] | DANO ML .Stress and failure analysis of mechanical fastened joints in composite laminates[J].Computers & Structures,2000,50(03):287-296. |
| [6] | Bulent Murat Icten;Ramazan Karakuzu .Progressive failure analysis of pin-loaded carbon-epoxy woven composite plates[J].Composites science and technology,2002(9):1259-1271. |
| [7] | Larry W. Byrd;Victor Birman .Effectiveness of z-pins in preventing delamination of co-cured composite joints on the example of a double cantilever test[J].Composites, Part B. Engineering,2006(4/5):365-378. |
| [8] | P. CHANG;A.P. MOURITZ;B.N. COX .Properties and failure mechanisms of pinned composite lap joints in monotonic and cyclic tension[J].Composites science and technology,2006(13):2163-2176. |
| [9] | HKS;ABAQUS.User's Manual.Version 6.5-1[M]. |
| [10] | 王波 .三维编织复合材料力学行为研究[D].西北工业大学,2003. |
| [11] | 刘(韦华),矫桂琼,管国阳,常岩军.Z-pin增强陶瓷基复合材料拉伸和层间剪切性能[J].复合材料学报,2007(01):86-90. |
| [12] | 孔宪仁,黄玉东,范洪涛,孙文训.细编穿刺C/C复合材料不同层次界面剪切强度的测试分析[J].复合材料学报,2001(02):57-60. |
| [13] | 贾成厂.陶瓷基复合材料导论[M].北京:冶金工业出版社,2002:124-150. |
| [14] | 张增光 .2D-C/SiC复合材料的弹性常数预测及失效模式研究[D].西北工业大学,2005. |
| [15] | JAMES G;RATCLIFFE T;Kevin O' Brian .Discrete Spring Model for Predicting Delamination Growth in Z-Fiber Reinforced DCB Specimens[NASA/TM-2004-213019][R].Hampton,Virginia:NASA,2004. |
| [16] | COX B N .Constitutive model for fiber tow bridging a delamination crack mechanics[J].Computers & Structures,1999,6:117-38. |
| [17] | COX B N .Snubbing effects in the pullout of fibrous rod from a laminate[J].Mechanics Advanced Material Structure,2005,12(02):85-98. |
| [18] | COX B N;SRIDHAR N .a traction law for inclined fiber tows bridging mixed-mode cracks[J].Mechanics Advanced Material Structure,2002,9:299-331. |
| [19] | CARTIE D D R;COX B N .Mechanisms of crack bridging by composite and metallic rods[J].Composite (A),2004,13:25-1336. |
| [20] | MARCELLO Grassi;ZHANG X .Finite element analyses of mode Ⅰ interlaminar delamination in z-fibre reinforced composite laminates[J].Composites Science and Technology,2003,63:1818-32. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%