通过热压缩试验研究了TC11钛合金退火态片层组织在两相区980℃,950℃,850℃,应变速率0.001s-1,0.01s-1条件下,变形程度30%～70%范围内的热变形过程.分析了热变形参数对变形行为和片层组织球化过程的影响,并根据片层组织球化分数演变特征,建立了修正的Avrami 片层组织球化动力学方程,与试验数据吻合较好.
参考文献
| [1] | 王金友;葛志明.航空用钛合金[M].上海:上海科学技术出版社,1985:200-201. |
| [2] | 曾卫东,周义刚.冷速对TC11合金β加工显微组织和力学性能的影响[J].金属学报,2002(12):1273-1276. |
| [3] | R.M.Miller;T.R.Bieler;S.L.Semiatin .FLOW SOFTENING DURING HOT WORKING OF Ti-6Al-4V WITH A LAMELLAR COLONY MICROSTRUCTURE[J].Scripta materialia,1999(12):1387-1393. |
| [4] | Semiatin SL;Weiss I;Seetharaman V .Flow behavior and globularization kinetics during hot working of Ti-6Al-4V with a colony alpha microstructure[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(2):257-271. |
| [5] | S. L. SEMIATIN;T. R. BIELER .THE EFFECT OF ALPHA PLATELET THICKNESS ON PLASTIC FLOW DURING HOT WORKING OF Ti-6Al-4V WITH A TRANSFORMED MICROSTRUCTURE[J].Acta materialia,2001(17):3565-3573. |
| [6] | SEMIATIN S L;SEETHARAMAN V;WEISS I.Hot working of titanium alloys-an overview[M].New York,1997:3-37. |
| [7] | SESHACHARYULU T;Medeiros S C;Frazier W G et al.Microstructural Mechanism during Hot Working of Commercial Grade Ti-6Al-4V with Lamellar Starting Structure[J].Materials Science and Engineering,2002,A325:112-125. |
| [8] | G.A. Salishchev;S.V. Zerebtsov;S.Yu. Mironov .Formation of Grain Boundary Misorientation Spectrum in Alpha-Beta Titanium Alloys with Lamellar Structure under Warm and Hot Working[J].Materials Science Forum,2004(Pt.1):501-506. |
| [9] | 周军,曾卫东,舒滢,周义刚.热变形参数对Ti-17合金的片状α球化过程的影响[J].热加工工艺,2005(01):16-18,41. |
| [10] | 周军,曾卫东,舒滢,周义刚.应用热加工图研究TC17合金片状组织球化规律[J].稀有金属材料与工程,2006(02):265-269. |
| [11] | 孙新军 .钛合金片层组织的等轴化规律及超细晶钛合金超塑性的研究[D].清华大学,1999. |
| [12] | 姚泽坤.热加工工艺参数对TC11钛合金叶片显微组织细化、球化的影响[J].热加工工艺,1995(01):6. |
| [13] | 陈慧琴,郭灵,曹春晓.TC11钛合金片层组织热变形行为及组织演变[J].航空材料学报,2008(01):18-22. |
| [14] | 孙新军,白秉哲,顾家琳,陈南平.TC11合金热变形行为及Z-D关系的研究[J].稀有金属,2000(03):171-177. |
| [15] | 毛卫民;赵新兵.金属的再结晶与晶粒长大[M].北京:冶金工业出版社,1994 |
| [16] | FURU T;MARTHINSEN K;NES E .Modeling recrystallization[J].Journal of Materials Science and Technology,1990,6(11):1093-1101. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%