研究了室温大气环境下不同应力比R和不同应力集中系数Kt条件下2E12高强铝合金的高周疲劳性能,并利用扫描电镜及透射电镜对合金疲劳断口附近的微观组织及疲劳断口进行了分析.研究结果表明,在同一应力水平下,2E12高强铝合金的疲劳寿命随着应力比R的增大而提高;Kt=1时合金的疲劳寿命远远大于Kt=3时合金的疲劳寿命,表明此合金具有明显的缺口效应.疲劳断口由疲劳源区、裂纹扩展区及瞬断区组成.第二相对疲劳裂纹的萌生起着重要的作用,并且初步讨论了有关的疲劳断裂机理.
参考文献
[1] | CASSADA W;LIU J;TALEY J.Aluminum alloys for aircraft structure[J].Current Advances in Materials and Processes,2002(12):27-29. |
[2] | Manabu Nakai;Takehiko Eto .New aspects of development of high strength aluminum alloys for aerospace applications[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):62-68. |
[3] | Jr STARKE E A;STALEYTJT .Application of modern aluminum alloys to aircraft[J].Progress in Aerospace Sciences,1996,32(2-3):131-172. |
[4] | SRIVATSAN T S;KOLAR D;MAGNISEN P .The cyclic fatigue and final fracture behavior of aluminum alloy 2524[J].Materials & Design,2002,23(02):129-139. |
[5] | T. S. Srivatsan;D. Kolar;P. Magnusen .Influence of temperature on cyclic stress response, strain resistance, and fracture behavior of aluminum alloy 2524[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1/2):118-130. |
[6] | Grandt, A.F. Jr;Bray, GH;Golden, PJ .A comparison of fatigue crack formation at holes in 2024-T3 and 2524-T3 aluminum alloy specimens[J].International Journal of Fatigue,1999(Supplement 1):0-0. |
[7] | SURESH S.Fatigue of Materials[M].London.UK:Cambridge University Press,1998 |
[8] | American Society of Materials.Fatigue and Fracture Handbook[M].Materials Park.OH:ASM International,1996 |
[9] | WALSH JA;JATA KV;STARKE EA Jr .The influence of Mn dispersoid content and stress state on ductile fracture of 2134 type A1 alloys[J].Acta Metallurgica,1989,37(11):2861. |
[10] | 徐灏.疲劳强度[M].北京:高等教育出版社,1998:11-23. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%