以Ti,A1和活性炭粉为主要原料,利用高能球磨及热压烧结工艺在1200℃合成Al2O3/Ti3AlC2复合材料,复合材料是在Ti3AlC2层状材料的制备过程中同时被合成.研究了在Ti-Al-C体系中,烧结温度对反应产物的影响,并重点分析了反应机理及材料微观结构对件能的影响.结果表明:通过高能球磨使的Ti3AlC2的烧结温度降低,在1200℃热压烧结时得到了物相比较均匀的、致密的Al2O3/Ti3AlC2复合材料;通过xRD,DSC和SEM测试,分析了Al2O3/Ti3AlC2复合材料的相组成及显微结构,发现Al2O3以颗粒形式均匀地分布在Ti3AlC2基体中,起到弥散增强的效果,并通过阻碍Ti3AlC2表面微裂纹的扩展使裂纹在断裂扩展过程中中断,起到微裂纹增韧效果,大大提高了复合材料的力学性能.
参考文献
| [1] | Michel W.Barsoum .The M_(N+1)AX_N Phases: A new Class of solids; Thermodynamically Stable Nanolaminates[J].Progress in Solid State Chemistry,2000(1/4):201-281. |
| [2] | Barsoum MW.;Elraghy T. .SYNTHESIS AND CHARACTERIZATION OF A REMARKABLE CERAMIC - TI3SIC2[J].Journal of the American Ceramic Society,1996(7):1953-1956. |
| [3] | CHAPUT L;HUG G;PéCHEUR P et al.Thermopower of the 312 MAX phases Ti3AlC2,Ti3GeC2,and Ti3AlC2[J].Physical Review B,2007,35(10):1-5. |
| [4] | CHAPUT L;HUG G;PéCHEUR P et al.Thermopower of the 312 MAX Phases Ti3AlC2,Ti3GeC2,and Ti3AlC2[J].Physical Review B,2007,75:35-39. |
| [5] | N.V.Tzenov;M.W.Barsoum .Synthesis and characterization of Ti_3AlC_2[J].Journal of the American Ceramic Society,2000(4):825-832. |
| [6] | LEE D B;PARK S W .High-Temperature oxidation of Ti3AlC2 between 173 and 1 473 K in Air[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2006,434:147-154. |
| [7] | LI Shi-bo;ZHAI Hong-xiang.Synthesis and microstructure of Ti3AlC2 by mechanically activated sintering of elemental Powders[J].Ceramics International,2007(33):169-173. |
| [8] | XU Xue-wen,LI Yang-xian,ZHU Jiao-qun,MEI Bing-chu.High-temperature oxidation behavior of Ti3AlC2 in air[J].中国有色金属学会会刊（英文版）,2006(z1):869-873. |
| [9] | 王苹,梅炳初,洪小林,朱教群,周卫兵,严明.热压合成Ti2AlC材料及热力学分析[J].武汉理工大学学报,2007(04):5-7. |
| [10] | WANG Xiao-hui;ZHOU Yan-chun .Improvement of intermediate-temperature oxidation resistance of Ti3AlC2 by Pre-oxidation at high temperatures[J].Materials Research Innovations,2003,7:205-211. |
| [11] | 昝青峰;汪长安;黄勇 等.Al2O3/Ti3SiC2层状材料的残余应力分析[J].稀有金属材料与工程,2002,31(增刊):137-1401. |
| [12] | Qingfeng Zan;Chang-an Wang;Yong Huang;Shike Zhao;Cuiwei Li .The interface-layer and interface in the Al_2O_3/Ti_3SiC_2 multilayer composites prepared by in situ synthesis[J].Materials Letters,2003(24/25):3826-3832. |
| [13] | WANG H J;JINA Z H;MIYAMOTOB Y.Effect of Al2O3 on mechanical properties of Ti3SiC2/Al2O3 composite[J].Ceramics International,2002(28):931-934. |
| [14] | 余晓娟,梅炳初,周卫兵.原位热压合成Ti3AlC2/Al2O3复合材料的研究[J].稀有金属快报,2007(10):30-33. |
| [15] | 梅炳初,徐学文,朱教群,刘俊.Ti3AlC2的制备与微观结构[J].硅酸盐学报,2004(07):897-900. |
| [16] | 周卫兵,梅炳初,朱教群,洪小林.Ti3AlC2陶瓷材料的制备及性能研究[J].山东陶瓷,2003(04):3-5. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%