以环硼氮烷和伞氧聚硅氮烷组成的混杂先驱体为原料,采用先驱体浸渍-裂解工艺制备了空心石英纤维增强氮化硼-氮化硅混杂基体的复合材料,研究了裂解温度对复合材料的致密化、力学性能、介电性能和断口显微形貌的影响.结果表明,当裂解温度从300℃提高到500℃时,复合材料的密度逐渐增大,材料的弹性模量随之提高,而其弯曲强度先增后减.当裂解温度为400℃时,复合材料表现出最高抗弯强度(132.4MPa),这源于较小的纤维损伤以及基体和纤维之间良好的界面结合状态.随着裂解温度的提高,复合材料的介电常数也逐渐增大,但三种温度下制备的复合材料均具有较低的介电常数(2.60～3.01)和较低的损耗角正切值(小于5×10-3),材料良好的介电性能源于介电性能优异的高纯度空心石英纤维增强相和较低密度的尤碳氮化物基体.
参考文献
| [1] | 李斌,张长瑞,曹峰,王思青,齐共金.高超音速导弹天线罩设计与制备中的关键问题分析[J].科技导报,2006(08):28-31. |
| [2] | 姜勇刚,张长瑞,曹峰,胡海峰,王思青,齐共金.宽频天线罩结构设计及制备工艺进展[J].材料导报,2006(08):1-4. |
| [3] | 雷景轩,施志伟,胡伟,赵中坚,邬浩,谈桥.高温宽频带陶瓷导弹天线罩研究进展[J].陶瓷学报,2007(02):144-149. |
| [4] | 齐共金,张长瑞,胡海峰,曹峰,王思青,曹英斌,姜勇刚.陶瓷基复合材料天线罩制备工艺进展[J].硅酸盐学报,2005(05):632-638. |
| [5] | 彭望泽.防空导弹天线罩[M].北京:宇航出版社,1993:17. |
| [6] | 姜勇刚,张长瑞,曹峰,王思青,胡海峰,齐共金.氮化物陶瓷基复合材料烧蚀透波性能研究[J].中国科学E辑,2007(05):661-666. |
| [7] | 姜勇刚,张长瑞,曹峰,王思青,曹英斌.高超音速导弹天线罩透波材料研究进展[J].硅酸盐通报,2007(03):500-505. |
| [8] | WALTON JR J D .Reaction sintered silicon nitride for high temperature radome application[J].American Ceramic Society Bulletin,1974,53(03):255-258. |
| [9] | 齐共金,张长瑞,胡海峰,曹峰,王思青,姜勇刚.全氢聚硅氮烷浸渍裂解法制备高性能3D SiO2/Si3N4复合材料[J].中国科学E辑,2005(11):1121-1126. |
| [10] | 姜勇刚,张长瑞,曹峰,王思青.石英纤维织物增强氮化物陶瓷基复合材料的性能[J].硅酸盐学报,2007(05):537-540,545. |
| [11] | SHORE S G;PARRY R W .The Crystalline Compound Ammonia Borane,H3N@BH3[J].Journal of the American Chemical Society,1955,77:6084-6085. |
| [12] | HOUGH W V;GUIBERT C R;HEFFERAN G T .Method for the Synthesis of Borazine[P].US Patent,4150097,1979. |
| [13] | Wideman T.;Sneddon LG. .CONVENIENT PROCEDURES FOR THE LABORATORY PREPARATION OF BORAZINE[J].Inorganic Chemistry: A Research Journal that Includes Bioinorganic, Catalytic, Organometallic, Solid-State, and Synthetic Chemistry and Reaction Dynamics,1995(4):1002-1003. |
| [14] | ISODA T;KAYA H;NISHII H et al.Perhydropolysilazane precursors to silicon nitride ceramics[J].Journal of Inorganic and Organometallic Polymers,1992,2(01):151-160. |
| [15] | SU K;REMSEN E E;ZANK G A et al.Synthesis,characterization,and ceramic conversion reactions of borazine-modified hydridopolysilazanes:new polymeric precursors to SiNCB ceramic composites[J].Chemistry of Materials,1993,5:547-556. |
| [16] | QI G J;ZHANG C R;HU H F et al.Preparation of three-dimensional silica fiber reinforced silicon nitride composite using perhydropolysilazane as precursor[J].Materials Letters,2005,59(26):3256-3258. |
| [17] | 李斌 .氮化物陶瓷基耐烧蚀、透波复合材料的制备与性能研究[D].长沙:国防科学技术大学,2007. |
| [18] | 齐共金,张长瑞,胡海峰.两种先驱体低温裂解制备石英纤维增强氮化硅复合材料[J].复合材料学报,2006(05):107-110. |
| [19] | 李斌,张长瑞,曹峰,王思青,曹英斌.两种碳纤维增强Cf/BN-Si3N4复合材料性能对比[J].材料工程,2008(02):35-39. |
| [20] | 仝毅;周馨我 .微波透波材料的研究进展[J].材料导报,1997,11(03):1-5. |
| [21] | A.V. Goncharenko;V.Z. Lozovski;E.F. Venger .Lichtenecker's equation: applicability and limitations[J].Optics Communications: A Journal Devoted to the Rapid Publication of Short Contributions in the Field of Optics and Interaction of Light with Matter,2000(1/4):19-32. |
| [22] | Regalado CM .A physical interpretation of logarithmic TDR calibration equations of volcanic soils and their solid fraction permittivity based on Lichtenecker's mixing formulae[J].Geoderma: An International Journal of Soil Science,2004(1/2):41-50. |
| [23] | JIANG Y G;ZHANG C R;CAO F et al.Fabrication of High Performance SiO2r/Si3N4-BN Composites for High temperature Application[J].Advancde Engineering Materials,2007,9(1-2):114-116. |
| [24] | 李斌,张长瑞,曹峰,王思青,姜勇刚.混杂聚硼硅氮烷的陶瓷化过程研究[J].无机材料学报,2008(02):229-232. |
| [25] | 杜耀惟.天线罩电信设计方法[M].北京:国防工业出版社,1993:64-65. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%