研究植入工艺参数和材料性能对X-cor夹层结构剪切刚度的影响.通过对pin端部所受约束的细节分析,得到端部约束的三个等效弹簧系数表达式,用于X-cor夹层结构剪切刚度模型计算,并考察pin植入角度、端部斜切角、植入端深度、直径、材料性能和泡沫材料性能等参数对剪切刚度的影响规律.计算结果与试验结果吻合较好,该方法可用于预测X-cor夹层结构剪切刚度.参数分析结果表明,通过增大pin植入角度、pin轴向刚度以及pin直径可显著提高X-cor夹层结构的剪切刚度;pin端部斜切角和植入端深度是次要影响因素;另外,当选用的泡沫材料较刚硬时,不能忽略泡沫材料对结构剪切刚度的贡献.
参考文献
| [1] | CARSTENSEN T C;KUNKEL E;MAGEE C.X-corTM advanced sandwich core material[A].Seattle:Society for the Advancement of Material and Process Engineering,2001:452-466. |
| [2] | Denis D. Cartie;Norman A. Fleck .The effect of pin reinforcement upon the through-thickness compressive strength of foam-cored sandwich panels[J].Composites science and technology,2003(16):2401-2409. |
| [3] | Andrea I. Marasco;Denis D.R. Cartie;Ivana K. Partridge .Mechanical properties balance in novel Z-pinned sandwich panels: Out-of-plane properties[J].Composites, Part A. Applied science and manufacturing,2006(2):295-302. |
| [4] | C. Kocher;W. Watson;M. Gomez .Integrity of Sandwich Panels and Beams with Truss-Reinforced Cores[J].Journal of Aerospace Engineering,2002(3):111-117. |
| [5] | Rice MC;Fleischer CA;Zupan M .Study on the collapse of pin-reinforced foam sandwich panel cores[J].Experimental Mechanics,2006(2):197-204. |
| [6] | 田旭,肖军,李勇.X-cor夹层结构试制与性能研究[J].飞机设计,2004(01):22-25. |
| [7] | 杜龙,矫桂琼,黄涛.Z-pin增强泡沫夹层结构面压缩性能研究[J].航空材料学报,2008(04):101-106. |
| [8] | 黄涛,矫桂琼,杜龙.X-cor增强泡沫夹层结构力学性能试验[J].航空学报,2008(06):1542-1549. |
| [9] | 杜龙,矫桂琼,黄涛,赵龙,黄峰.X状Z-pin增强泡沫夹层结构的剪切性能[J].复合材料学报,2007(06):140-146. |
| [10] | DU Long;JIAO Gui-qiong;HUANG Tao .Investigation of the Effect of Z-Pin Reinforcement on the Collapse of Foam-Cored Sandwich Panels[J].Journal of Reinforced Plastics and Composites,2008,27:1211-1224. |
| [11] | L. DU;JIAO GUIQIONG;HUANG TAO .The Elastic Properties of Sandwich Structure with Z-pinned Foam Core[J].Journal of Reinforced Plastics and Composites,2009(7):813-813. |
| [12] | L. DU;JIAO GUIQIONG;HUANG TAO .Z-pin Reinforcement on the Core Shear Properties of Polymer Foam Sandwich Composites[J].Journal of Composite Materials,2009(3):289-300. |
| [13] | 郝继军,张佐光,李敏,孙志杰.X-cor夹层复合材料平压性能分析[J].航空学报,2008(04):1079-1083. |
| [14] | Hao Juun;Zhang Zuoguang;Li Min .The Influence of Preparing Method on Novel X-Truss/Foam Sandwich Structure[J].Journal of Reinforced Plastics and Composites,2009(13):1553-1565. |
| [15] | Zhang Zuoguang;Hao Jijun;Li Min .Mechanical Performance of X-Truss/Foam Sandwich Construction[J].Journal of Reinforced Plastics and Composites,2009(21):2631-2643. |
| [16] | 李勇,肖军,谭永刚,原永虎,党旭丹.X-cor夹层结构压缩性能研究[J].航空学报,2009(03):557-561. |
| [17] | 原永虎,肖军,李勇,谭永刚,党旭丹.玻璃纤维制备X-cor夹层结构工艺及压缩性能研究[J].材料工程,2008(z1):447-450,453. |
| [18] | 谭永刚,肖军,李勇,原永虎.X-cor夹层结构剪切性能[J].宇航材料工艺,2008(05):75-77. |
| [19] | 党旭丹,谭永刚,肖军,李勇,原永虎.X-cor夹层结构压缩模量有限元分析[J].材料工程,2009(01):50-54. |
| [20] | P. CHANG;A. P. MOURITZ;B. N. COX .Properties and failure mechanisms of z-pinned laminates in monotonic and cyclic tension[J].Composites, Part A. Applied science and manufacturing,2006(10):1501-1513. |
| [21] | O′ BRIEN K T;PARIS I L .Exploratory investigation of failure mechanisms in transition regions between solid laminates and X-CorTM truss sandwich[J].Computers & Structures,2002,57:189-204. |
| [22] | DAVID John brrett .The mechanics of z-fiber reinforcement[J].Computers & Structures,1996,36:23-32. |
| [23] | M. Grassi;X. Zhang;M. Meo .Prediction of stiffness and stresses in z-fibre reinforced composite laminates[J].Composites, Part A. Applied science and manufacturing,2002(12):1653-1664. |
| [24] | Liu, T;Deng, ZC;Lu, TJ .Analytical modeling and finite element simulation of the plastic collapse of sandwich beams with pin-reinforced foam cores[J].International Journal of Solids and Structures,2008(18/19):5127-5151. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%