采用Ti-Zr-Cu-Ni在960℃/1min、960℃/10min和960℃/60min三种规范下真空钎焊Ti3Al/Ti3Al,在960℃/5min和960℃/20min两种规范下真空钎焊Ti3Al/GH536.实验结果表明,随着保温时间的延长,Ti3Al/Ti3Al接头宽度逐渐增加,且剪切强度呈现递增趋势,递增幅度在10MPa左右,接头主要由Ti,Al,NiTi2,CuTi,等化合物相组成,其中NiTi2,CuTi3等脆性化合物的分布对接头性能影响较大;在Ti3Al/GH536接头中由于Fe-Ti,Ni-Ti等脆性化合物分布相对较多,导致出现纵向裂纹,960℃/5min规范下的平均剪切强度为86.4MPa.
参考文献
| [1] | 张永刚;韩雅芳;陈国良.金属间化合物结构材料[M].北京:国防工业出版社,2001 |
| [2] | 邹敦叙;李世琼;仲增墉 .航空航天理想新材料Ti3Al和TiAl金属间化合物合金开发新进展[J].钢铁研究学报,1997,9:45-50. |
| [3] | BAESLACK III W A;MASCORELLA T J;KELLY T J .Weldability of a titanium aluminide[J].Welding Journal,1989,68(12):483-498. |
| [4] | Threadgill PL. .THE PROSPECTS FOR JOINING TITANIUM ALUMINIDES[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(0):640-646. |
| [5] | DAVID S A;HORTON J A;GOODWIN G M et al.Weldability and microstructure of a titanium aluminide[J].Welding Journal,1990,69(04):133-140. |
| [6] | 崔约贤;甄良;杨德庄 等.Ti223Al214Nb23V合金电子束焊接接头的显微组织及其力学性能[J].焊接学报,1998,19(06):134-139. |
| [7] | 吴爱萍,邹贵生,张红军,王国庆,谢美蓉.Ti-24A1-17 Nb合金的激光焊接[J].宇航材料工艺,2001(06):58-62. |
| [8] | THREADGILL P L.Metallurgical aspects of joining titanium aluminide-alloys[A].Materials Transactions-Japan Institute of Metals,1991:1021-1025. |
| [9] | RIDLEY N.Superplastic behavior and diffusion of a titanium aluminide alloy[A].London,Institute Metals,1991:198-200. |
| [10] | CADDEN C H;YANG N Y C;HEADLEY T H.Microstructural evolution and mechanical properties of braze joints in Ti-13.4Al-21.2Nb[J].Welding Research Supplement,1997(08):316-325. |
| [11] | BIRD R K;HOFFMAN E K .Evaluation of the transient liquid phase(TLP)bonding process for Ti3Al-based honeycomb core sandwich structure[NASA/TP-1998-208421][R]. |
| [12] | 张启运;庄鸿寿.钎焊手册[M].北京:机械工业出版社,1998 |
| [13] | 虞觉奇;易文质;陈邦迪.二元合金状态图集[M].上海:上海科学技术出版社,1987 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%