采用热压缩试验研究了置氢量0.42%(质量分数)TC4钛合金粉末烧结材料在温度850～1000℃和应变速率0.001～0.10 s-1范围内的流变行为和组织演变,分析了该合金烧结材料在试验参数范围内变形的应力-应变曲线特征.动力学分析获得置氢TC4钛合金粉末烧结材料高温压缩变形的应力指数和变形激活能分别为3.97和507.35 kJ/mol,表明置氢TC4钛合金粉末制品在高温变形过程中均发生了动态再结晶.组织观察发现,在β相区变形时,β晶粒随金属流动方向明显被拉长、变形;在α+β相区变形时,β相的组织变化基本同其在β相区变形时一样,只是β相再结晶过程加剧;在α相区变形时,原始的双态组织中α相组织发生再结晶,初生的α相含量逐渐减少.
参考文献
| [1] | SEMIATIN S L;DELO D P .Equal channel angular extrusion of difficult-to-work alloys[J].Materials & Design,2000,21(04):311-322. |
| [2] | O. A. Kaibyshev .Grain refinement in commercial alloys due to high plastic deformations and phase transformations[J].Journal of Materials Processing Technology,2001(3):300-306. |
| [3] | 王清,李中华,孙东立,武高辉.TC4钛合金的热变形行为及其影响因素[J].材料热处理学报,2005(04):56-59. |
| [4] | 田亚强,陈晓辉,侯红亮,任学平.置氢对TC4合金粉末物理性能和压制性能的影响[J].北京科技大学学报,2008(08):893-897. |
| [5] | Seshacharyulu T.;Medeiros SC.;Frazier WG.;Prasad YVRK. .Microstructural mechanisms during hot working of commercial grade Ti-6Al-4V with lamellar starting structure[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):112-125. |
| [6] | SESHACHARYULU T;MEDEIROS S C;MORGAN J T .Hot deformation and microstruetural damage mechanisms in extra low interstitial(ELI)Ti-6Al-4V[J].Materials Science and Engineering,2000,A279(122):289-299. |
| [7] | R. S. Rosen;S. P. Paddon;M. E. Kassner .The variation of the yield stress of Ti alloys with strain rate at high temperatures[J].Journal of Materials Engineering and Performance,1999(3):361-367. |
| [8] | HUANG C;LAI K L;LEE C S .Deformation characteristics of Ti-24Al-14Nb-3V-0.5Mo alloy during hot compression[J].Journal of Materials Processing Technology,1998,73(123):119-124. |
| [9] | PRASAD Y V R K;SESHACHARYULU T;Mdediros S C et al.Effect of prior β-grain size on the hot deformation behavior of Ti-6Al-4V:coarse vs coarse[J].Journal of Materials Engineering and Performance,1999,09(02):153-160. |
| [10] | ZENR C;HOLLOMAN J H .Effect of strain rate upon the plastic flow of steel[J].Journal of Applied Physics,1944,15:22. |
| [11] | 中国科学院数学研究所统计组.常用数理统计方法[M].北京:科学出版社,1973:100-102. |
| [12] | 曲银化,孙建科,孟祥军.TC4钛合金高温压缩变形行为的研究[J].材料开发与应用,2006(02):24-29. |
| [13] | KANTER J J .The problems of a temperature coefficient of tensile creep rate[J].Transactions of the AIME,1938,131:385. |
| [14] | 丁桦,宋丹,杜云蕙,张彩碚,崔建忠,白秉哲,万初杰.Ti3Al-Nb合金超塑压缩变形的研究[J].钢铁研究学报,1999(03):34-37. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%