针对以改性双马来酰亚胺树脂(BMI)为基体的树脂膜熔渗(RFI)成型工艺,以三维热传导方程与固化动力学模型为控制方程,采用有限元/有限差分方法对所得方程进行离散求解.为了衡量固化质量,提出了两个新的控制参数,并用于最优固化温度控制工艺的模拟.数值结果表明,构件内部温度与固化度均高于表面,而固化保持温度和起始时间会对构件中温度和固化度的均匀性产生较大影响.数值模拟结果对固化过程的优化设计有重要的指导意义.
参考文献
| [1] | LOOS A C;MACRAC J D .A process simulation model for the manufacture of a blade-stiffened panel by the resin film infusion process[J].Computer Science and Technology,1996,56(03):273-289. |
| [2] | T. Behzad;M. Sain .Finite element modeling of polymer curing in natural fiber reinforced composites[J].Composites science and technology,2007(7/8):1666-1673. |
| [3] | 谭华,晏石林.热固性树脂基复合材料固化过程的三维数值模拟[J].复合材料学报,2004(06):167-172. |
| [4] | 陈祥宝,邢丽英,周正刚.树脂基复合材料制造过程温度变化模拟研究[J].航空材料学报,2009(02):61-65. |
| [5] | 张纪奎,郦正能,关志东,程小全,王军.热固性树脂基复合材料固化变形影响因素分析[J].复合材料学报,2009(01):179-184. |
| [6] | N. Pantelelis;T. Vrouvakis;K. Spentzas .Cure cycle design for composite materials using computer simulation and optimisation tools[J].Forschung im Ingenieurwesen,2003(6):254-262. |
| [7] | A. MAWARDI;R. PITCHUMANI .Cure Cycle Design for Thermosetting-Matrix Composites Fabrication under Uncertainty[J].Annals of operations research,2004(nov):19-45. |
| [8] | Kwan Ho Lee;Dai Gil Lee .Smart cure cycles for the adhesive joint of composite structures at cryogenic temperatures[J].Composite structures,2008(1/3):37-44. |
| [9] | A. Cheung;Y. Yu;K. Pochiraju .Three-dimensional finite element simulation of curing of polymer composites[J].Finite elements in analysis & design,2004(8):895-912. |
| [10] | 于佳,王振清,张博明,王殿富,张宝艳,陈祥宝.改性双马来酰亚胺树脂固化工艺动力学模型的建立[J].材料工程,2005(04):55-59. |
| [11] | Qi Zhu;Philippe H.Geubelle;Min Li;Charles L.Tucker III .Dimensional accuracy of thermoset composites:simulation of process-induced residual stresses[J].Journal of Composite Materials,2001(24):2171-2205. |
| [12] | 胡照会,王荣国,马李,刘文博.CFRP压力容器固化成型过程中边界条件的确定[J].纤维复合材料,2007(01):26-28. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%