对MGH956合金板材的电子束焊和氩弧焊接头组织及其室温～1100℃的拉伸性能进行了研究.采用光学显微镜和扫描电镜对接头组织和拉伸断口的检验结果表明:电子束焊和氩弧焊使母材中原有超细的氧化物弥散强化相明显粗化,接头组织中有更粗大、且取向与母材原始晶粒取向相垂直的晶粒生成,以及不可避免地留有孔洞.组织上的改变导致接头不仅800℃以上的高温强度明显降低,而且低温脆性倾向明显加剧.MGH956合金板材电子束焊和氩弧焊的接头组织和拉伸性能表明,电子束焊具有明显的优势,具备工程应用的潜力.
参考文献
| [1] | KELLY T J.Joining mechanical alloys for fabrication[A].London:IncoMap,1983:129-138. |
| [2] | FLOREEN S;KANE R H;KELLY T J.An evaluation of Incoloy alloy MA 956 for a high temperature heat exchanger application[A].New York:IncoMap,1981:94-99. |
| [3] | POTIER W A.Fusion welding of incoloy alloy MA 956[A].New York:lncoMap,1981:120-120. |
| [4] | Khan TI.;Wallach ER. .TRANSIENT LIQUID-PHASE BONDING OF FERRITIC OXIDE DISPERSION STRENGTHENED SUPERALLOY MA957 USING A CONVENTIONAL NICKEL BRAZE AND A NOVEL IRON-BASE FOIL[J].Journal of Materials Science,1995(20):5151-5160. |
| [5] | KHAN T I;WALLACH E R .Transient liquid phase diffusion bonding and associated recrystallization phenomenon when joining ODS ferritic superalloy[J].Materials Science,1996,31:2937-2943. |
| [6] | KRAUTWASSER P;FILEMONOWICZ A C;WIDERA M et al.Thermal stability of dispersoids in ferritic oxide-dispersion-strengthened alloys[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1994,177:199-208. |
| [7] | NUTIING J;UBHI S;HUGHES T A.The development of Microstructure in incoloy MA 956[A].New York:IncoMap,1981:33-40. |
| [8] | CHEN Y L;JONES A R;POND R C et al.The microstructure and recrystallization of flow-formed oxide-dispersion-strengthened ferritie alloy,Part II:Recrystallization behavior[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2002,33:3787-3794. |
| [9] | DAVIDSON J M.Ductile-brittle transition behavior of Incoloy alloy MA956[A].London:IncoMap,1983:163-189. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%