通过三种复合材料Z-pin的轴向压缩试验,观察了各Z-pin的压缩行为,分析了三种复合材料Z-pin在不同长度时的极限应力及其失效形式.结果表明,直径为0.50mm的碳纤维Z-pin的压缩性能最好,其各长度Z-pin所能承担的极限应力都较大.直径0.28mm的碳纤维Z-pin易发生失稳现象,芳纶纤维Z-pin在压缩力的作用下,接触端容易受到破坏.两种碳纤维Z-pin临界应力的理论值与试验值吻合较好,但芳纶纤维Z-pin的临界应力的试验值比理论值偏低.
参考文献
| [1] | A.P. Mouritz .Review of z-pinned composite laminates[J].Composites, Part A. Applied science and manufacturing,2007(12):2383-2397. |
| [2] | 王晓旭,陈利.复合材料z-pinning技术的应用与发展[J].宇航材料工艺,2009(06):10-14. |
| [3] | FREITAS G;FUSCO T;CAMPBELL T.Z-Fibre technology and products for enhancing composite design[A].Florence,Italy,1996 |
| [4] | MARASCO A I .Analysis and evaluation of mechanical performance of reinforced sandwich structures:X-CorTM and K-CorTM[D].London:Crarnfield University,2005. |
| [5] | FREITAS G;MAGEE C;DARDZINSKI P et al.Fiber insertion process for improved damage tolerance in aircraft laminates[J].Journal Advanced Material,1994,25(04):36-43. |
| [6] | PARTRIDGE I K;CARTIE'DD R;BONNINGTONT.Manufacture and performance of z-pinned composites[A].Katz Boca Raton:CRC Press,2003:103-139. |
| [7] | PARTRIDGE I K;CARTIE' D D R .Delamination resistant laminates by z-fiber(R) pinning.Part Ⅰ:manufacture and fracture performance[J].Composites Part A:Applied Science and Manufacturing,2005,36(01):55-64. |
| [8] | Denis D.R. Cartie;Manos Troulis;Ivana K. Partridge .Delamination of Z-pinned carbon fibre reinforced laminates[J].Composites science and technology,2006(6):855-861. |
| [9] | IIU H Y;YAN W Y;YU X Y.Experimental study on zpinned DCB mode Ⅰ delamination[A].Brisbane,2004 |
| [10] | Wenyi Yan;Hong-Yuan Liu;Yiu-Wing Mai .Mode Ⅱ delamination toughness of z-pinned laminates[J].Composites science and technology,2004(13/14):1937-1945. |
| [11] | P. CHANG;A.P. MOURITZ;B.N. COX .Properties and failure mechanisms of pinned composite lap joints in monotonic and cyclic tension[J].Composites science and technology,2006(13):2163-2176. |
| [12] | 陶永强,矫桂琼.Z-pins增强陶瓷基复合材料单搭接接头的裂纹尖端能量释放率[J].应用力学学报,2008(02):347-350. |
| [13] | MC BEATH S .Safety pins[J].Racecar Engineering,2002,12:56-62. |
| [14] | Z-pins strengthen the super hornet,save weight and cost[J].The Integrator,2001,3:1-2. |
| [15] | VAIDYA U K;DUNCAN B;KOPACZ J.Affordable processing and characterization of multi-functional z-pin reinforced VARTM composites[A].北京,2001:214. |
| [16] | 刘(韦华),矫桂琼,管国阳,常岩军.Z-pin增强陶瓷基复合材料拉伸和层间剪切性能[J].复合材料学报,2007(01):86-90. |
| [17] | P. Chang;A.P. Mouritz;B.N. Cox .Flexural properties of z-pinned laminates[J].Composites, Part A. Applied science and manufacturing,2007(1):244-251. |
| [18] | A.P. Mouritz .Compression properties of z-pinned composite laminates[J].Composites science and technology,2007(15/16):3110-3120. |
| [19] | 田旭,肖军,李勇.X-cor夹层结构试制与性能研究[J].飞机设计,2004(01):22-25. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%