建立一种多喷嘴同时喷射淬火冷却的数学模型,通过实测冷却曲线分析计算厚板驻点区与紊流区换热系数分布规律,基于ABAQUS模拟软件模拟验证模型.结果表明:驻点与紊流点处的换热系数随时间分布是不均匀的,在10～20s内出现峰值,随后呈上下波动变化的规律；实测(或计算)试样心部与表面的冷却曲线与模拟的吻合较好,验证了多喷嘴同时喷射下的换热系数分布模型.
参考文献
| [1] | Mansoo Choi;Han Seoung Yoo;Geunyoung yang;Joon Sik Lee;Dong Kee sohn .Measurements of impinging jet flow and heat transfer on a semi-circular concave surface[J].International Journal of Heat and Mass Transfer,2000(10):1811-1822. |
| [2] | 周定伟,马重芳,任玉涛.圆形浸没射流冲击下有关压力梯度的理论分析[J].西安交通大学学报,1999(07):54-56. |
| [3] | BUDDHIKA N.A numerical study of heat transfer performance of ossillatory impinging jets[J].International Journal of Heat and M ass Transfer,2009(52):396-406. |
| [4] | GARDON R;COBONPUE J.Heat transfer between a flat plate and jets of air impinging on it[J].Internationnal Developments in Heat Transfer ASME New York,1962:454-460. |
| [5] | GARDON R;AKFIRAT J C .The role of turbulence in determining the heat transfer characteristics of impinging jets[J].International Journal of Heat and Mass Transfer,1965,8:1261-1272. |
| [6] | KERCHER D M;TABAKOFF W.Heat transfer by a square array of round air jets impinging perpendicular to a flat surface including the effect of spent air[J].Journal of Engineering for Power,Transactions of the ASME,1970:73-82. |
| [7] | 马重芳,陈永昌.自由表面二维平面射流冲击传热的理论分析[J].北京工业大学学报,2000(03):59-62. |
| [8] | 赵耀华;马重芳 .圆形自由射流冲击任意热流密度平板时的换热分析[J].北京工业大学学报,1989,15(03):7-13. |
| [9] | 陈庆光,徐忠,张永建.湍流冲击射流流动与传热的数值研究进展[J].力学进展,2002(01):92-108. |
| [10] | 张靖周;常海萍.传热学[M].北京:科学出版社,2009:70-88. |
| [11] | 廖凯,WU Yun-xin,吴运新,张园园.铝合金厚板淬火表面换热系数的离散解析求法[J].材料热处理学报,2009(01):192-196. |
| [12] | 牛珏,温治,王俊升.圆形喷口紊流冲击射流流动与传热过程数值模拟[J].冶金能源,2007(01):16-20. |
| [13] | 薛胜熊.高压水射流技术与应用[M].北京:机械工业出版社,1998:8-20. |
| [14] | 俞景禄;魏季和.冶金中的传热传质现象[M].北京:冶金工业出版社,1981:296-299. |
| [15] | Muammer Koc;John Culp;Taylan Altan .Prediction of residual stresses in quenched aluminum blocks and their reduction through cold working processes[J].Journal of Materials Processing Technology,2006(1/3):342-354. |
| [16] | 李辉平,赵国群,贺连芳.时间步长对淬火过程温度场和组织场模拟精度的影响[J].金属热处理,2007(02):60-64. |
| [17] | ABAQUS Analysis User's Manual,User Subroutines,FILM,Section 25,2.6[Z]. |
| [18] | 郭世贵 .7050铝合金材料喷淋淬火的试验与模拟研究[D].中南大学,2010. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%