建立了两种三维有限元模型,采用弹塑性材料属性、无限元边界和显示分析求解.对于单丸冲击的情况,研究了喷丸速度、表面粗糙程度、时间间隔、冲击次数等因素影响残余应力场和等效塑性应变分布的一般规律;对于多丸冲击的情况,通过比较不同数目的丸粒冲击结果,来研究覆盖率对于残余应力场分布的影响规律.
参考文献
| [1] | Al-HASSANI S T S.Mechanical aspects of residual stress development in shot peening[A].Paris,France:Pergamon Press Ltd,1981:583-602. |
| [2] | MEGUID S A;KLAIR M S .An examination of the relevance of coindentation studies to incomplete coverage in shot peening using the finite element method[J].Journal of Mechanical Working Technology,1985,11:87-104. |
| [3] | MEGUId S A;SHAGAL G;STRANARt J C et al.Three-dimension dynamic finite element analysis of shot peening induced residual stress[J].Finite Elements in Analysis and Design,1999,31:179-191. |
| [4] | K. Schiffner;C. Droste gen. Helling .Simulation of residual stresses by shot peening[J].Computers & structures,1999(1/3):329-340. |
| [5] | BARAGETTI S .Three-dimension finite element procedures for shot-peening residual stress field prediction[J].International Journal of Computer Applications in Technology,2001,14:51-63. |
| [6] | MEGUID S A;SHAGAL G;StRANART J C .3D FE analysis of peening of sensitive materials using multiple impingement model[J].International Journal of Impact Engineering,2002,27:119-134. |
| [7] | G. H. Majzoobi;R. Azizi;A. Alavi Nia .A three-dimensional simulation of shot peening process using multiple shot impacts[J].Journal of Materials Processing Technology,2005(0):1226-1234. |
| [8] | 李雁淮,王飞,吕坚,徐可为.单丸粒喷丸模型和多丸粒喷丸模型的有限元模拟[J].西安交通大学学报,2007(03):348-352. |
| [9] | 凌祥,彭薇薇,倪红芳.喷丸三维残余应力场的有限元模拟[J].机械工程学报,2006(08):182-189. |
| [10] | 张洪伟,张以都,吴琼.喷丸强化残余应力场三维数值分析[J].航空动力学报,2010(03):603-609. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%