应用TIG焊、激光-TIG电弧复合焊工艺,采用单面焊背面双侧成形焊接技术对钛合金T-型结构进行焊接.对两种工艺进行金相组织、拉伸、弯曲、疲劳性能对比试验.研究结果表明,激光-TIG电弧复合焊工艺焊接钛合金T-型结构,近缝区及热影响区晶粒长大倾向明显要小于TIG焊接头,激光-TIG电弧复合焊工艺的明显高于TIG焊工艺,复合焊接的疲劳强度相比TIG焊提高约50％.因此,激光-TIG电弧复合焊工艺焊接钛合金T-型结构综合力学性能优于TIG焊接头.
参考文献
| [1] | Richard Freeman .Welding and joining developments in the aerospace industry[J].Welding and Cutting,2008(5):274-275. |
| [2] | 刘昌奎,刘华.TA15钛合金焊接接头性能与断裂行为研究[J].失效分析与预防,2006(02):45-48. |
| [3] | V. N. Zamkov;V. P. Prilutsky;V. F. Topolsky .Consumables and methods for welding titanium for aerospace engineering applications[J].Journal of advanced materials,2000(3):57-61. |
| [4] | B. H. Choi;B. K. Choi .The effect of welding conditions according to mechanical properties of pure titanium[J].Journal of Materials Processing Technology,2008(1-3):526-530. |
| [5] | KORSUNSKY;ALEXANDER M;DINI Daniele.Fatigue crack growth velocity analysis in a titanium alloy[J].Key Engineering Materials,2008(385-387):5-8. |
| [6] | L. M. Liu;X. F. Hao;X. Du .Microstructure characteristics and mechanical properties of laser-TIG hybrid welding joint of TA15 titanium alloy[J].Materials research innovations,2008(3):60-61. |
| [7] | HAN Chuan-xi;QU Heng-lei.Investigations on welding characteristics of a novel high temperature titanium alloy[A].SAMPE,Japan,1994:231-237. |
| [8] | 张振海 .钛合金T-型结构力学性能研究[D].北京:北京工业大学,2008. |
| [9] | LEE Sunghak;LEE Eui W .High-cycle fatigue properties of investment cast Ti-6Al-4V alloy welds[J].Journal of Materials Science Letters,2001,20(24):2183-2187. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%