欢迎登录材料期刊网

材料期刊网

高级检索

为了研究喷丸强化对2024铝合金预拉伸板疲劳特性的影响以及喷丸强化前后疲劳寿命的数学分布及可靠度模型,对铸钢丸喷丸强化前后的2024铝合金预拉伸板进行疲劳对比试验.结果表明:喷丸强化能明显提高2024铝合金预拉伸板的疲劳寿命.对喷丸强化前后的疲劳寿命分布进行拟合优度检验发现:喷丸强化前疲劳寿命服从威布尔分布,而喷丸强化后的疲劳寿命服从对数正态分布.建立了2024铝合金预拉伸板喷丸强化前后疲劳寿命的分布模型和可靠度模型.

参考文献

[1] DALAE1 K;KARLSSON B;SVENSSON L E .Stability of residual stresses created by shot peening of pearlitic steel and their influence on fatigue behaviour[J].Procedia Engineering,2010,2:613-622.
[2] Liu, W.C.;Dong, J.;Zhang, P.;Korsunsky, A.M.;Song, X.;Ding, W.J. .Improvement of fatigue properties by shot peening for Mg-10Gd-3Y alloys under different conditions[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(18):5935-5944.
[3] M. Klemenz;V. Schulze;I. Rohr;D. Lohe .Application of the FEM for the prediction of the surface layer characteristics after shot peening[J].Journal of Materials Processing Technology,2009(8):4093-4102.
[4] 高玉魁.喷丸强化对TC4钛合金组织结构的影响[J].稀有金属材料与工程,2010(09):1536-1539.
[5] Mylonas, G.I.;Labeas, G. .Numerical modelling of shot peening process and corresponding products: Residual stress, surface roughness and cold work prediction[J].Surface & Coatings Technology,2011(19):4480-4494.
[6] 凌祥,彭薇薇,倪红芳.喷丸三维残余应力场的有限元模拟[J].机械工程学报,2006(08):182-189.
[7] 吴运新,廖凯.铝合金厚板拉伸过程横向残余应力消减分析[J].材料工程,2009(10):45-48.
[8] 凌丹 .威布尔分布模型及其在机械可靠性中的应用研究[D].电子科技大学,2010.
[9] KATSUJI TOSHA;DAISUKE UEDA;HIROKAZU SHIMODA;SHIGEO SHIMIZU .A Study on P-S-N Curve for Rotating Bending Fatigue Test for Bearing Steel[J].Tribology Transactions,2008(2):166-172.
[10] 熊俊江.疲劳断裂可靠性工程学[M].北京:国防工业出版社,2008
[11] 李舜酩.机械疲劳与可靠性设计[M].北京:科学出版社,2006
[12] Anduin E. Touw .Bayesian Estimation Of Mixed Weibull Distributions[J].Reliability engineering & system safety,2009(2):463-473.
[13] TOSHIO NAKAGAWA .RANDOM AND AGE REPLACEMENT POLICIES[J].International journal of reliability, quality and safety engineering,2010(1):27.
[14] 张钧,栾新刚,张立同.疲劳损伤对3D C/SiC复合材料裂纹分布的影响[J].航空材料学报,2009(05):94-98.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%