介绍连续纤维增强金属基复合材料的种类及其在航空航天领域的应用情况,并对连续纤维增强金属基复合材料研制过程中的难点和热点问题进行归纳和总结,对关键技术问题提出相应的研究方法和思路.纤维与金属基体间的界面问题是其研究与应用的最主要问题,可以从纤维的表面改性、纤维与基体的相容性和润湿性、界面反应、界面强度等方面入手,结合各种复合材料制备工艺的特点,解决界面薄弱性问题；另外加强复合材料损伤机理的研究,建立其损伤评价体系,可以为其实际应用提供参考依据；先进的加工成型和连接技术,可以降低复合材料零件的制造成本,确保零件质量,是复合材料产业化应用的重要保证.
参考文献
| [1] | 张效宁,王华,胡建杭,吴桢芬.金属基复合材料研究进展[J].云南冶金,2006(05):53-58,73. |
| [2] | 张效宁,王华,胡建杭,吴桢芬.金属基复合材料研究进展[J].云南冶金,2006(05):53-58,73. |
| [3] | 刘连涛,孙勇.纤维增强铝基复合材料研究进展[J].铝加工,2008(05):9-13. |
| [4] | 刘连涛,孙勇.纤维增强铝基复合材料研究进展[J].铝加工,2008(05):9-13. |
| [5] | 王丽雪,曹丽云,刘海鸥.铝基复合材料研究的进展[J].轻合金加工技术,2005(08):10-12,52. |
| [6] | 王丽雪,曹丽云,刘海鸥.铝基复合材料研究的进展[J].轻合金加工技术,2005(08):10-12,52. |
| [7] | 张新明,彭卓凯,陈健美,邓运来.耐热镁合金及其研究进展[J].中国有色金属学报,2004(09):1443-1450. |
| [8] | 张新明,彭卓凯,陈健美,邓运来.耐热镁合金及其研究进展[J].中国有色金属学报,2004(09):1443-1450. |
| [9] | 董群,陈礼清,赵明久,毕敬.镁基复合材料制备技术、性能及应用发展概况[J].材料导报,2004(04):86-90. |
| [10] | 董群,陈礼清,赵明久,毕敬.镁基复合材料制备技术、性能及应用发展概况[J].材料导报,2004(04):86-90. |
| [11] | 张萍,张永忠,尹法章,张习敏.碳纤维增强镁基复合材料的制备及微观结构分析[J].有色金属,2011(01):19-22. |
| [12] | 张萍,张永忠,尹法章,张习敏.碳纤维增强镁基复合材料的制备及微观结构分析[J].有色金属,2011(01):19-22. |
| [13] | HAJO D;NORBERT H;KARL U K .Magnesium based MMCs reinforced with C-fibers[J].Advances in Technology of Materials and Materials Processing,2004,6(02):136-141. |
| [14] | 张坤;李华伦;周尧和.碳纤维增强镁基复合材料制备工艺[J].航空工艺技术,1993(03):23-25. |
| [15] | ZHANG K;LI H L;ZHOU Y H.Preparation process of carbon fibre reinforced Mg-based composite[J].Aeronautical Manufacturing Technology,1993(03):23-25. |
| [16] | 宋美慧,武高辉,姜龙涛,王宁.碳纤维增强AZ91D复合材料微观组织[J].稀有金属材料与工程,2008(10):1861-1864. |
| [17] | 宋美慧,武高辉,姜龙涛,王宁.碳纤维增强AZ91D复合材料微观组织[J].稀有金属材料与工程,2008(10):1861-1864. |
| [18] | MARK R S;RICHARD T;MARIA P .The effect of thermal cycling on the properties of a carbon fiber reinforced magnesium composite[J].Materials Science and Engineering A:Structural Materials:Properties Microstructure and Processing,2005,397(1/2):249-256. |
| [19] | CHAUDHARY A B;BATHE K J .A solution method for static and dynamic analysis of three-dimensional contact problems with friction[J].Computers & Structures,1986,24(06):855-873. |
| [20] | 武高辉,宋美慧,王宁.二维碳纤维/镁基复合材料的力学和热膨胀性能[J].机械工程材料,2008(03):69-71,86. |
| [21] | 武高辉,宋美慧,王宁.二维碳纤维/镁基复合材料的力学和热膨胀性能[J].机械工程材料,2008(03):69-71,86. |
| [22] | SKLENICKA V;SVOBODA M;PAHUTOVA M et al.Microstructural processes in creep of an AZ91magnesiumbased composite and its matrix alloy[J].Materials Science and Engineering A:Structural Materials:Properties Microstructure and Processing,2001,319/320/321:741-745. |
| [23] | D.B. Gundel;S.G. Warrier .The transverse tensile behavior of SiC-fiber/Ti-6Al-4V composites 2. Stress distribution and interface failure[J].Composites science and technology,1999(7):1087-1096. |
| [24] | Christoph Leyens;Frank Kocian;Joachim Hausmann;Wolfgang A. Kaysser .Materials and design concepts for high performance compressor components[J].Aerospace science and technology,2003(3):201-210. |
| [25] | Guo SQ.;Saito H.;Masuda C.;Kagawa Y. .Microstructural characterization of interface in SiC fiber-reinforced Ti-15V-3Cr-3Al-3Sn matrix composite[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):25-35. |
| [26] | HANUSIAK W M;FIELDS J L;NANSEN D S.Titanium Matrix Composites (TMC) Status[A].,2003:2463-2469. |
| [27] | VASSEL A;PAUTONNIER F;RAFESTIN M.Potentials of Onhorhombic Titanium Aluminide Composites[A].Hamburg:WILEY-VCH Verlag GmbH & Co.KGaA,2003:2471-2478. |
| [28] | 毛小南,张鹏省,于兰兰,袁少冲,赵永庆.纤维增强钛基复合材料研究新进展[J].稀有金属快报,2005(05):1-7. |
| [29] | MAO XN;ZANGPS;YU LL.Review of the research on fibre reinforced Mg-based composite[J].Rare Metals Letters,2005(05):1-7. |
| [30] | 袁武华,吉喆,张召春,杨寿智.钛基复合材料及其制备技术研究进展[J].材料导报,2005(04):54-57. |
| [31] | 袁武华,吉喆,张召春,杨寿智.钛基复合材料及其制备技术研究进展[J].材料导报,2005(04):54-57. |
| [32] | 罗国珍.钛基复合材料的研究与发展[J].稀有金属材料与工程,1997(02):1-7. |
| [33] | 罗国珍.钛基复合材料的研究与发展[J].稀有金属材料与工程,1997(02):1-7. |
| [34] | Krishnamurthy S.;Miracle DB.;Smith PR. .Modification of transverse creep behavior of an orthorhombic titanium aluminide based Ti-22Al-23Nb/SiCf composite using heat treatment[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):285-289. |
| [35] | ZAHEDI A;MITCHELL S C.Advanced technology engine casing designs[A].,1991:1-10. |
| [36] | PAPANICOLOPOULOS A.Advanced composite fiber/metal pressure vessels for aircraft applications[A].,1993:1-9. |
| [37] | Subramanian PR.;Keller ST.;Mendiratta MG.;Krishnamurthy S. .Processing of continuously reinforced Ti-alloy metal matrix composites (MMC) by magnetron sputtering[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1):1-10. |
| [38] | BALDINI S;STANGE W.Development of fiber optic sensors for titanium matrix composites[A].,1990:1-4. |
| [39] | M. S. Storozhenko;A. P. Umanskii;V. A. Lavrenko .COMPOSITES BASED ON TiB_2-SiC WITH A NICKEL-CHROMIUM MATRIX[J].Powder Metallurgy and Metal Ceramics,2012(11/12):719-725. |
| [40] | MILEIKO S T;KIIKO V M;KOLCHIN A A et al.Oxide-fibre/nickel-based matrix composites-part Ⅰ:Fabrication and microstructure[J].Composites Science and Technology,2002,62:167-179. |
| [41] | Sungtae Kim;J.H.Perepezko;Z.Dong;A.S.Edelstein .Interface Reaction between Ni and Amorphous SiC[J].Journal of Electronic Materials,2004(10):1064-1070. |
| [42] | 林海涛 .SiC纤维增强镍基复合材料的界面研究[D].东北大学,2007. |
| [43] | 林海涛,石南林,孙超,宫骏,孙旭东.SiC纤维表面扩散障碍涂层对SiCf/Ni复合材料界面反应的影响[J].金属学报,2007(04):444-448. |
| [44] | 林海涛,石南林,孙超,宫骏,孙旭东.SiC纤维表面扩散障碍涂层对SiCf/Ni复合材料界面反应的影响[J].金属学报,2007(04):444-448. |
| [45] | W. HU;W. WUNDERLICH;D. PONGE .INTERFACIAL CHEMICAL STABILITY DURING DIFFUSION BONDING OF Al_2O_3 FIBRES WITH Ni_3Al AND NiAl MATRICES[J].Canadian Metallurgical Quarterly,1995(3):231-236. |
| [46] | Koch CC. .Intermetallic matrix composites prepared by mechanical alloying - a review[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1):39-48. |
| [47] | CRIMP M J .Novel approach to intermetallic matrix composite processing[J].Materials Science and Engineering A:Structural Materials:Properties Microstructure and Processing,1994,192:633-639. |
| [48] | Inoue M.;Suganuma K.;Niihara K.;Nagao H. .Fracture properties of Fe-40 at.% Al matrix composites reinforced with ceramic particles and fibers[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):298-305. |
| [49] | KUMAR K S;BAO G .Intermetallic matrix composites:An review[J].Composites Science and Technology,1994,52:127-150. |
| [50] | Mortensen A.;Flemings M.C. .Solidification of Binary Hypoeutectic Alloy Matrix Composite Castings[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1996(3):595-609. |
| [51] | SEKHAR J A;TRIVEDI R .Development of solidification microstructures in the presence of fibers or channels of finite width[J].Materials Science and Engineering A:Structural Materials:Properties Microstructure and Processing,1989,114:133-146. |
| [52] | HAJJARI E;DIVANDARI M;MIRHABIBI A R.The effect of applied pressure on fracture surface and tensile properties of nickel coated continuous carbon fiber reinforced aluminum composites fabricated by squeeze casting[J].Materials & Design,2010(31):2381-2386. |
| [53] | Singh J;Wolfe DE .Nano and macro-structured component fabrication by electron beam-physical vapor deposition (EB-PVD)[J].Journal of Materials Science,2005(1):1-26. |
| [54] | BETTGE D;GUNTHER B.Thermo-Mechanical Fatigue Failure and the Life Predition of a Undirectionally Reinforced SP-700/SCS-6 Composite[A].Hamburg:WILEY-VCH Verlag GmbH & Co.KGaA,2003:2577-2584. |
| [55] | Stoloff NS. .Iron aluminides: present status and future prospects[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):1-14. |
| [56] | VIALA J C;PEILLON N;CLOCHEFERT L;BOUIX J .Diffusion paths and reaction mechanisms in the high-temperature chemical interaction between carbon and titanium aluminides[J].Materials Science and Engineering A:Structural Materials:Properties Microstructure and Processing,1995,203:222-237. |
| [57] | Dudek HJ.;Leucht R.;Kaysser WA.;Borath R. .TRANSMISSION ELECTRON MICROSCOPY OF THE FIBRE-MATRIX INTERFACE IN SIC-SCS-6-FIBRE-REINFORCED LMI834 ALLOYS[J].Journal of Materials Science,1997(20):5355-5362. |
| [58] | Y. Q. Yang;H. J. Dudek .Interface stability in SCS-6 SiC/Super α_2 composites[J].Scripta materialia,1997(4):503-510. |
| [59] | YANG Y Q;DUDEK H J;KUMPFERT J .TEM investigations of the fibre/matrix interface in SCS-6 SiC/Ti-25Al10Nb-3V-1Mo composites[J].Composites Part (A),1998,29(9/10):1235-1241. |
| [60] | Brendel A;Woltersdorf J;Pippel E;Bolt H .Titanium as coupling agent in SiC fibre reinforced copper matrix composites[J].Materials Chemistry and Physics,2005(1):116-123. |
| [61] | Akira Fukushima;Chikara Fujiwara;Yutaka Kagawa;Chitoshi Masuda .Effect of interfacial properties on tensile strength in SiC/Ti-15-3 composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):243-249. |
| [62] | 杨雪,张军,于琨,赵新英.金属基复合材料界面强度测试方法的研究[J].材料科学与工程学报,2000(z1):327-330. |
| [63] | YANG X;ZHANG J;YU K et al.Research on the interfacial strength of metal matrix composites[J].Materials Science and Engineering,2000,18:327-329. |
| [64] | 李旭东,张跃,张凡伟,张大海,李仲平.复合材料界面对其断裂过程影响的有限元研究[J].宇航材料工艺,2008(03):22-25. |
| [65] | 李旭东,张跃,张凡伟,张大海,李仲平.复合材料界面对其断裂过程影响的有限元研究[J].宇航材料工艺,2008(03):22-25. |
| [66] | NIMMER R P;BANKERT R J;RUSSEL E S et al.Micromechanical modeling of fiber/matrix interface effects in transversely loaded SiC/Ti-6-4 metal matrix composites[J].Journal of Computer and Technology Research,1991,13:3-13. |
| [67] | Aghion E.;Bronfin B. .Magnesium Alloys Development towards the 21~(st) Century[J].Materials Science Forum,2000(0):19-28. |
| [68] | SKLENICKA V;SVOBODA M;PAHUTOVA M;et at .Microstructural processes in creep of an AZ91magnesiumbased composite and its matrix alloy[J].Materials Science and Engineering A:Structural Materials:Properties Microstructure and Processing,2001,319/320/321:741-745. |
| [69] | OKAZAKI M;YAMAZAKI Y;HIRANO K.Thermo-Mechanical Fatigue Failure and the Life Prediction of a Undirectionally Reinforced SP-700/SCS-6 Composite[A].Hamburg:WILEY-VCH Verlag GmbH & Co.KGaA,2003:2463-2469. |
| [70] | 施惠基,胡齐阳,牛莉莎,王中光.纤维增强金属基复合材料热机械疲劳模型的研究进展[J].力学进展,2002(01):81-91. |
| [71] | 施惠基,胡齐阳,牛莉莎,王中光.纤维增强金属基复合材料热机械疲劳模型的研究进展[J].力学进展,2002(01):81-91. |
| [72] | Jianfu Mao;Tsunemichi Imai;Shangli Dong;Naobumi Saito;Ichinori Shigematsu;Sumito Kojima;Takashi Ishikawa .Superplasticity of nitride mullite short fiber-reinforced 6061 aluminum composites[J].Scripta materialia,2003(11):1061-1066. |
| [73] | 陈凯;俞蒙槐;胡上序 .ZA22/Al2O3复合材料室温拉伸强度的模拟研究[J].金属学报,1997,33(04):437-442. |
| [74] | CHEN K;YU M H;HU S X .Simulation on the tensile strength at room temperature of ZA22/Al2O3 composite[J].Acta Metallurgica Sinica,1997,33(04):437-442. |
| [75] | W. Ding;J. Liu;P. Bowen .EFFECTS OF FIBRE INTER-PLY DISTANCE ON THE TRANSVERSE TENSILE BEHAVIOUR OF TITANIUM MATRIX COMPOSITES[J].Scripta materialia,2001(3):443-448. |
| [76] | Masaki Hojo;Masaaki Mizuno;Thomas Hobbiebrunken;Taiji Adachi;Mototsugu Tanaka;Sung Kyu Ha .Effect of fiber array irregularities on microscopic interfacial normal stress states of transversely loaded UD-CFRP from viewpoint of failure initiation[J].Composites science and technology,2009(11/12):1764-1771. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%