利用辉光离子渗的方法,在TC4钛合金表面沉积Mo耐磨涂层.利用XRD、SEM、EDS、显微硬度仪和摩擦磨损试验机研究了沉积温度(850℃,950℃和1050℃)对Mo涂层的组织结构、耐磨性能及磨损机制的影响.结果表明:涂层由Mo外层和互扩散区组成,互扩散区主要为Mo-Ti固溶体相;随着沉积温度的升高,Mo涂层的生长速率增加,但平均晶粒尺寸增大,因而硬度、耐磨性能降低;纯滑动干摩擦载荷为98N时,950℃/5h沉积所形成Mo涂层的磨损速率约为TC4钛合金的1/45.
参考文献
| [1] | LEYENSC;PETERS M;陈振华.钛与钛合金[M].北京:化学工业出版社,2005 |
| [2] | Zhecheva A;Sha W;Malinov S;Long A .Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods[J].Surface & Coatings Technology,2005(7):2192-2207. |
| [3] | BUDINSKI K G .Tribological properties of titanium alloys[J].Wear,1991,151(02):203-217. |
| [4] | PalDey S.;Deevi SC. .Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review [Review][J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):58-79. |
| [5] | T. A. Stolarski;S. Tobe .The effect of spraying distance on wear resistance of molybdenum coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(12):1096-1102. |
| [6] | Jin G;Xu BS;Wang HD;Li QF;Wei SC .Tribological properties of molybdenum coatings sprayed by electro-thermal explosion directional spraying[J].Surface & Coatings Technology,2007(15):6678-6680. |
| [7] | M. Laribi;A. B. Vannes;D. Treheux .Study of mechanical behavior of molybdenum coating using sliding wear and impact tests[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2007(11/12):1330-1336. |
| [8] | Usmani S.;Sampath S. .Time-dependent friction response of plasma-sprayed molybdenum[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1999(2):1131-1140. |
| [9] | Tang Bin;Hu Xinfang;Xu Kewei .Fabrication of high-melting point metal coating[J].Transactions of Nonferrous Metals Society of China,1997(4):88-91. |
| [10] | Tang B.;Wu PQ.;Li XY.;Fan AL.;Xu Z.;Celis JP. .Tribological behavior of plasma Mo-N surface modified Ti-6Al-4V alloy[J].Surface & Coatings Technology,2004(2/3):333-339. |
| [11] | 秦林,唐宾,赵晋香,徐重.钛合金Ti6Al4V表面渗钼层的摩擦磨损性能[J].中国有色金属学报,2003(03):570-573. |
| [12] | BAKER H.Alloy Phase Diagrams[M].ASM Handbook:Vol.3.Ohio:ASM International,Materials Park,1992 |
| [13] | ALONSO P R;RUBIOLO G H .Ordering and phase separation around Ti50A125Mo25 composition in ternary Ti-Al-Mo bcc alloys[J].Journal of Alloys and Compounds,2004,363:90-98. |
| [14] | 姜传海;杨传铮.X射线衍射技术及其应用[M].上海:华东理工大学出版社,2010 |
| [15] | K. Bobzin;E. Lugscheider;M. Maes;P. Immich;S. Bolz .Grain size evaluation of pulsed TiAlN nanocomposite coatings for cutting tools[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2007(7/8):3681-3684. |
| [16] | Yuan-Tsung Chen;C.C. Chang .Effect of grain size on magnetic and nanomechanical properties of Co_(60)Fe_(20)B_(20) thin films[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2010(2):113-117. |
| [17] | 卢柯;刘学东;胡壮麒 .纳米晶体材料的Hall-Petch关系[J].材料研究学报,1994,8(05):385-391. |
| [18] | HALL O E .The deformation and ageing of mild steel Ⅲ:discussion of results[J].Proceedings of the Physical Society of London,1951,B64:747-753. |
| [19] | PETCH N J .The cleavage strength of polycrystals[J].Journal of the Iron and Steel Institute,1953,174:25-28. |
| [20] | Lei Zhang;Chaoying Xie;Jiansheng Wu .Grain size estimations of annealed Ti-Ni shape memory thin films[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2007(1/2):318-322. |
| [21] | 田民波.薄膜技术与薄膜材料[M].北京:清华大学出版社,2006 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%