采用间歇式盐水喷雾试验和极化曲线测定,研究了Cu-18Fe、Cu-15Fe、Cu-16Fe-2Cr三种原位复合材料和纯铜在NaHSO3+NaCl、NaHSO3、NaCl三种介质中的腐蚀行为.模拟大气污染环境结果表明,NaHSO3对原位复合材料大气腐蚀的影响显著.Cr的加入,可明显提高原位复合材料的耐大气腐蚀性能.其中Cu-16Fe-2Cr原位复合材料在模拟污染大气中耐蚀性最好.
参考文献
[1] | Funkenbusch P D;Courting T H .Microstructural strengthening in cold worked in situ Cu-14. 8Vol% Fe composite[J].Scripta Metallurgica et Materialia,1981,15:1349-1354. |
[2] | Verhoeven J D;Chuen S C;Gibson E D .Strength and conductivity of in situ Cu-Fe alloys[J].Journal of Materials Science,1989,24:1748-1752. |
[3] | Spitzig W A;Krota P D .Comparison of the strength and microstructure of Cu-20% Ta and Cu-20% Nb in situ composites[J].Acta Materialia,1988,36(07):1709-1715. |
[4] | Sakal Y;Schneider-muntau H J .Ultra-high strengthhigh conductivity Cu-Ag alloy wire[J].Acta Materialia,1997,45:1017-1023. |
[5] | 王深强.高强高导铜合金的研究概述[J].材料工程,1995(07):3. |
[6] | Jerman G A;Anderson I E;Verhoeven J D .Strength and electrical conductivity of deformation processed Cu-15vol Pct Fe alloys produced by powder metallurgy techniques[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1993,24:35-42. |
[7] | Biselli C;Morris D G .Microstructure and strength of Cu-15 in situ composites after very high drawing strains[J].Acta Materialia,1996,44(02):493-504. |
[8] | 王振尧,于国才.铜在污染环境中的大气腐蚀[J].腐蚀与防护,2000(08):339-341,344. |
[9] | 蔡健平;郑逸萍;刘寿荣.氯化物、硫化物对碳钢大气腐蚀的协同作用[J].中国腐蚀与防护学报,1996(04) |
[10] | 陈鸿海.金属腐蚀学[M].北京:北京理工大学出版社,1996 |
[11] | 胡茂圃.腐蚀电化学[M].北京:冶金工业出版社,1991 |
[12] | 杨德钧;沈卓身.金属腐蚀学[M].北京:冶金工业出版社,1999 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%