对乳液聚合法制备出的聚甲基丙烯酸甲酯/蒙脱土(PMMA/MMT)复合材料在硫酸介质中的腐蚀情况进行了研究,探讨了蒙脱土含量、硫酸浓度以及腐蚀时间对腐蚀速率的影响.结果表明,硫酸浓度较低且腐蚀时间较短时,含有2%~3%蒙脱土的复合材料的腐蚀速率比PMMA明显降低;PMMA及其复合材料的腐蚀速率随腐蚀时间的延长而下降,随硫酸浓度的增加而上升;硫酸浓度越高或腐蚀时间越长,复合材料中蒙脱土的片层阻隔作用越不明显.
参考文献
[1] | Essawy H;Badran A;Youssef A;Abd El-Hakim AE .Synthesis of poly(methylmethacrylate)/montmorillonite nanocomposites via in situ intercalative suspension and emulsion polymerization[J].Polymer bulletin,2004(1):9-17. |
[2] | 包丽萍,杨延钊,韦学臣,周明,崔隽,刘吉军.PMMA/蒙脱土纳米复合材料的制备及其阻燃性能[J].青岛科技大学学报(自然科学版),2003(04):351-353. |
[3] | Zou Gang;Fang Kun;He Pingsheng .Study on bulk intercalation polymerization of PMMA/montmorillonite intercalated nanocomposite by dynamic torsional vibration method[J].Journal of Materials Science Letters,2002(10):761-763. |
[4] | Jash, P;Wilkie, CA .Effects of surfactants on the thermal and fire properties of poly(methyl methacrylate)/clay nanocomposites[J].Polymer Degradation and Stability,2005(3):401-406. |
[5] | Zhang Wei'an;Shen Xiaofeng;Li Yuan et al.Synthesis and characterization of poly(methyl methacrylate)/OMMT nanocomposites by γ-ray irradiation polymerization[J].Radiation Physics and Chemistry,2003,67:651-656. |
[6] | Yijin Xu;William J.Brittain;Chenchen Xue;Ronald K.Eby .Effect of clay type on morphology and thermal stability of PMMA-clay nanocomposites prepared by heterocoagulation method[J].Polymer: The International Journal for the Science and Technology of Polymers,2004(11):3735-3746. |
[7] | 陈奎,杨瑞成,吴明亮,成生伟,张庆国,许慧芳.聚合物/蒙脱土剥离型纳米复合材料逾渗理论分析[J].兰州理工大学学报,2006(01):29-32. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%