本文就采取速凝工艺制作的钕铁硼薄带中影响磁体性能的微观结构进行了研究.速凝薄带工艺可以得到较传统浇铸工艺更加精细的微观结构,母合金中基本消除了α-Fe.快速定向凝固得到了排列整齐的钕铁硼主相的片状晶结构,同时在贴辊面存在小于3μm的疏松的碎晶.氢破碎是速凝带理想的破碎方法.
参考文献
[1] | Liu W.L.;Liang Y.L. .Effects of Nb addition and/or casting method on the amount of precipitated Fe in NdFeB alloys[J].IEEE Transactions on Magnetics,1992(5):2154-2156. |
[2] | Fidler J;Bernardi J;Schrefl T .[J].Scripta Metallurgica et Materialia,1995,33:1781. |
[3] | Ma B M;Bounds C O .[J].Journal of Applied Physics,1991,70(10):6471. |
[4] | Scott DW.;Liang YL.;Bounds CO.;Ma BM. .MICROSTRUCTURAL CONTROL OF NDFEB CAST INGOTS FOR ACHIEVING 50 MGOE SINTERED MAGNETS[J].Journal of Applied Physics,1996(8 Pt.2a):4830-4832. |
[5] | Bernardi J.;Sagawa M.;Hirose Y.;Fidler J. .Microstructural analysis of strip cast Nd-Fe-B alloys for high (BH)(max) magnets[J].Journal of Applied Physics,1998(11 Pt.2):6396-6398. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%