高温合金属于难加工材料,本文对比研究了高温合金样件晶粒度对其加工性能的影响.文章主要对晶粒细化情况和细化晶粒后高温合金加工性能的变化情况分别进行实验研究,重点通过铣削力测试和加工后表面粗糙度测试实验,分析晶粒大小不同的高温合金试样加工性能变化,以此说明晶粒细化的实际意义.实验结果显示,晶粒细化可使铣削力降低50%以上,表面粗糙度Ra可从最初的3.135μm减小到0.83μm.因此得出通过细化晶粒组织可以有效提高高温合金的加工性能.文章最后对实验结果进行了分析,并对主铣削力与晶粒大小的关系进行了曲线拟合,得出主铣削力与晶粒大小关系近似服从三次多项式.
参考文献
[1] | 胡华南;徐大源;张崇高.高温合金切削加工技术现状与展望[J].安徽工学院学报,1999(09):47. |
[2] | 晶粒细化对Cu-12.2Al-4.0Mn形状记忆合金加工性能的影响[J].中国有色金属学报,1999(03):552. |
[3] | Xiong Yuhua;Yang Aimin.Grain refinement of superalloys K3 and K4169 by.the addition of refiners[J].Science and Technology of Advanced Materials,2001(02):13. |
[4] | Stoi'c A;Kopa'c J;Cukor G .Testing of machinability of mould steel 40CrMnMo7 using genetic algorithm[J].Journal of Materials Processing Technology,2005,164-165:1624. |
[5] | Xiong Yuhua;Yang Aimin.Effect of fine-grained structure on the mechanical properties of superalloys K3 and K4169[J].Science and Technology of Advanced Materials,2001(02):7. |
[6] | Ulvi Seker;Hasan Hasirci .Evaluation of machinability of austempered ductile irons in terms of cutting forces and surface quality[J].Journal of Materials Processing Technology,2006(3):260-268. |
[7] | HUANG Tai-wen,LIU Lin,YANG Ai-min,XIONG Yu-hua,ZHANG Rong.Mechanical properties of fine grained superalloy K4169 with addition of refiners[J].中国有色金属学会会刊(英文版),2005(02):280-285. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%