介绍了不同工艺制备的Si3N4、SiC的性能,研究了Si3N 4-SiC复相陶瓷及其碳纤维复合材料研究发展现状,认为Si3N4-SiC复相陶瓷能够克服单一Si3N4 、SiC陶瓷断裂韧性低、烧结过程中晶粒长大造成强度下降等缺点,同时也弥补了SiC陶瓷强度较低的遗憾;而碳纤维的加入可以大大改善材料的韧性.认为结合Si3N4-SiC复相陶瓷的高强度和碳纤维复合材料的高韧性,可以制备出性能优良的Cf /SiC-Si3N4陶瓷基复合材料 ,并就此方面的研究进展进行了综述.
参考文献
| [1] | 陶瓷材料学.周玉著[M].哈尔滨:哈尔滨工业大学出版社,1995:1. |
| [2] | 郭景坤 等.复相陶瓷材料的设计原则[J].硅酸盐学报,1996,24(01):7-12. |
| [3] | 李世普.特种陶瓷工艺学[M].武昌:武汉工业大学出版社,1990:112,121. |
| [4] | He JL.;Harrod JF.;Scarlete M. .SILICON NITRIDE AND SILICON CARBONITRIDE BY THE PYROLYSIS OF POLY(METHYLSILADIAZANE)[J].Journal of the American Ceramic Society,1995(11):3009-3017. |
| [5] | 雍成刚.肼合成Si-C-N纳米微粉先驱体研究[A].上海,1998:1001-1004. |
| [6] | Riedel R et al.Sintering of amorphous polymer-derived Si,N and C contain ing composite powders[J].Journal of the European Ceramic Society,1989,5:113-122. |
| [7] | 顾培芷 等.采用有机先驱体制备Si3N4-SiC纳米复相陶瓷[J].硅酸盐学报,1995,23(03):266-271. |
| [8] | Mathias Herrmann;Christian Schuber .Silicon nitride /silicon carbide nano c omposite materials:1 fabrication and mechanical properties at room temperature[J].Journal of the American Ceramic Society,1998,81(05):1095-1108. |
| [9] | 张伟儒.Si3N4/纳米SiC复相陶瓷的研究[J].硅酸盐学报,1998:4-9. |
| [10] | 曹英斌,张长瑞,陈朝辉,周新贵.Cf/SiC陶瓷基复合材料发展状况[J].宇航材料工艺,1999(05):10-14. |
| [11] | Yoshida H .The mechanical properties of carbon fiber reinforcement silicon carbide composites[J].Ceramic Engineering and Science Proceedings,1993,14(9-10):1133-1140. |
| [12] | 郑文伟 等.三维整体编织物增强陶瓷基复合材料的制备工艺及性能表征[J].复合材料学报,1997,14(01):48-53. |
| [13] | NaKano Kikuo .Fabrication and characterization of three-dimensional carbon fi ber reinforced silicon carbide and silicon nitride composites[J].Journal of the American Ceramic Society,1995,78(10):2811-2814. |
| [14] | Takahiro Tanaka et al.Fabrication and evaluation of 3-dimension tyrann o fib er reinforced SiC composites by repeated infiltration of polycarbo-silane[J].Journal of the Ceramic Society of Japan,1995,103(01):1-5. |
| [15] | Yoshida H .Influence of the orientation angle of fiber on mechanical proper ti es in unidirectional and two directional Cf/SiC[J].Journal of the Ceramic Society of Japan,1994,102(11):1016-1021. |
| [16] | Jing-Kun Guo et al.Carbon fiber-reinforced silicon nitride composite[J].Journal of Materials Science,1982,17:3611-3616. |
| [17] | Ogawa K.;Pezzotti G.;Nishida T.;Sugiyama F. .Impact strength of continuous-carbon-fiber-reinforced silicon nitride measured by using the split Hopkinson pressure bar[J].Journal of the American Ceramic Society,1998(1):166-172. |
| [18] | K.Suzuki;S.Kume .Fabrication of three-dimensional carbon fiber- reinforced Si_3N_4 composites by infiltration of slurry and organosilicon polymer[J].Journal of the Ceramic Society of Japan,1998(1231):348-351. |
| [19] | 胡海峰 .陶瓷先驱体的分子设计与合成及其在CMC<,s>制备中的应用[D].国防科学技术大学,1998. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%