低温聚合物基复合材料研究进展

宇航材料工艺 , 2003, 33(5): 21-25. doi: 10.3969/j.issn.1007-2330.2003.05.005

低温聚合物基复合材料研究进展

赵伟栋 ^1, , 张宗强 ^2, , 耿东兵 ^3, , 熊玉峰 ^4, , 王文虎 ^5,

1.航天材料及工艺研究所,北京,100076

2.航天材料及工艺研究所,北京,100076

3.航天材料及工艺研究所,北京,100076

4.中国科学院理化技术研究所低温事业部,北京,100080

5.中国科学院理化技术研究所低温事业部,北京,100080

关键词：聚合物基复合材料 , 纳米复合材料 , 低温性能 , 重复使用运载器

Progress of Research on Cryogenic Polymer Composites

对耐低温树脂基复合材料的研究背景及国内外研究现状进行了概述,并对聚合物基纳米复合材料,特别是插层复合材料的性能作了介绍.提出了解决液氢贮箱耐低温、防渗漏关键技术的研究设想.

参考文献

[1]	才满瑞.重复使用运载器的近期发展[J].导弹与航天运载技术,1999(02):56.
[2]	夏德顺.重复使用运载器贮箱的研制现状[J].导弹与航天运载技术,2001(02):12-18.
[3]	新型复合材料液氧贮箱试验成功[J].导弹与航天运载技术,2001(06):14.
[4]	Lightweight Composite-Material Tanks for Cryogenic Liquids[OL].http://www.nasa.gov
[5]	Reed P R .Shear/compressive fatigue of insulation systems at low temperature[J].CRYOGENICS,1995,35(11):685.
[6]	Baynham D E .Low temperature tensile and shear/tension properities of composites materials with electrically insulating barrier films[J].Advances in Cryogenic Engineering Materials,1998,44:197.
[7]	Hartwig G .Status and future of fiber composities[J].Advances in Cryogenic Engineering,1994,40:961.
[8]	Hartwig G .Low-temperature properties of epoxy resins and composities[J].Advances in Cryogenic Engineering Materials,1978,24:17-36.
[9]	Reed R P;Walsh R P .Tensile properties of resins at low temperatures[J].Advances in Cryogenic Engineering,1994,40:1129.
[10]	Fumio Sawa;Shigehiro Nishijimal;Yuichi Ohtani et al.Fracture toughness and relaxation of epoxy resins at cryogenic temperatures[J].Advances in Cryogenic Engineering,1994,40:1113.
[11]	Reed R P;Schramm R E;Clark A F.Mechanical,thermal,and electrical properties of selected polymers[J].Cryogenics,1973(02):67.
[12]	Jones H.;Hickman A.L. .Insulation and impregnation procedures used in magnet technology atthe Clarendon Laboratory, Oxford[J].IEEE Transactions on Applied Superconductivity: A Publication of the IEEE Superconductivity Committee,2000(1):1345-1346.
[13]	Baynham DE.;Gamage SJ.;Greenhalgh RJS.;Merrow D.;Robertson SJ.;Evans D. .Transverse mechanical properties of glass reinforced composite materials at 4 K[J].Cryogenics,1998(1):61-67.
[14]	Aakahira Aoki;Takashi Ishikawa;Hisashi Kumazawa et al.Mechanical performance of CF/polymer composite laminates under cryogenic conditions[R].AIAA 2000-1605,1448.
[15]	Reed R P;Golda M .Cryogenic properties of unidirectional composites[J].Cryogenics,1994,34(11):909.
[16]	Shigehiro Nishijimal;Toichi Okada;Yoshihide Honda .Evaluation of epoxy resin by positron annaihilation for cryogenic use[J].Advances in Cryogenic Engineering,1994,40:1137.
[17]	Hartwig G;Endres K;Haider O .Support elements with negative thermal expansion[J].Advances in Cryogenic Engineering,1994,40:1107.
[18]	Kord Pannkoke .Static and fatigue properties of UD carbon fibre composities at 77 K[J].Advances in Cryogenic Engineering,1994,40:1025.
[19]	陈国邦.低温工程材料[M].杭州:浙江大学出版社,1998:154-163.
[20]	JACKEL M;Scheibner W .Boundary layer induced modification of thermal and mechanical properties of epoxy resin composites[J].CRYOGENICS,1991,31(04):269.
[21]	Grimsley W;Cano J;Johnston J .Hybrid Composites for LH2 Fuel Tank Structure[OL].http://www.nasa.gov
[22]	徐国财;张立德.纳米复合材料[M].北京:化学工业出版社,2002:9-10.
[23]	黄锐;王旭;李忠明.纳米塑料-聚合物/纳米无机物复合材料研制、应用与进展[M].北京:中国轻工业出版社,2002:11-12.
[24]	乔放;李强;漆宗能.聚酰胺/粘土纳米复合材料的制备、结构表征及性能研究[J].高分子通报,1997(03):135.
[25]	赵竹第;李强;漆宗能.尼龙6/蒙脱土纳米复合材料的制备、结构与力学性能的研究[J].高分子学报,1997(05):519.
[26]	刘立敏,乔放,朱晓光,漆宗能,陈国庆.熔体插层制备尼龙6/蒙脱土纳米复合材料的性能表征[J].高分子学报,1998(03):0.
[27]	熊传溪,闻荻江,皮正杰.超微细AL2O2增韧增强聚苯乙烯的研究[J].高分子材料科学与工程,1994(04):69-73.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

低温聚合物基复合材料研究进展

Progress of Research on Cryogenic Polymer Composites

参考文献