运用弹塑性有限元法结合实验研究了连续和间隙连接的单搭接接头应力分布规律,并考虑了胶瘤的影响.结果表明,在相当大间隙长度范围内和适当的间隙位置条件下,间隙连接接头并没有大幅度地减小其承载能力,相反其有效搭接区域剪切强度呈明显升高趋势;胶层应力峰值仍然发生在搭接末端;胶瘤承担了相当大的载荷作用;过大的间隙长度以及不当的间隙位置会导致胶层靠近间隙端应力集中明显加剧,成为新的高应力区,可能导致接头破坏模式的改变.实验结果与数值分析结果很好地吻合.
参考文献
[1] | Olia M.;Rossettos JN. .ANALYSIS OF ADHESIVELY BONDED JOINTS WITH GAPS SUBJECTED TO BENDING[J].International Journal of Solids and Structures,1996(18):2681-2693. |
[2] | Lang T P;Mallick P K .The effect of recessing on the stresses in adhesively bonded single- lap joints[J].International Journal of Adhesion and Adhesives,1999,19:257-271. |
[3] | 郭忠信.铝合金结构胶接[M].北京:国防工业出版社,1993 |
[4] | 郑小玲,娜日松,游敏,焦建凯.胶瘤对单搭接胶接接头强度的影响[J].三峡大学学报(自然科学版),2001(06):530-532. |
[5] | 游敏 .金属-胶层复合材料接头性能及基础研究[D].华中科技大学,2002. |
[6] | Goncalves J P M;De Moura M F S F;De Castro P M S T .A three- dimensional finite element model for stress analysis of adhesively joints[J].International Journal of Adhesion and Adhesives,2002,22:357-365. |
[7] | Lang T P;Mallick P K .Effect of spew geometry on stresses in single lap adhesive joints[J].International Journal of Adhesion and Adhesives,1998,18:167-177. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%