为制备耐高温性能良好的SiC纤维,必须降低纤维中的氧含量,本文详细综述了国内外先驱体转化法制备SiC纤维中降低氧含量的方法,分析了各种方法的优缺点,比较可行有效的方法有电子束/γ射线辐射交联法、高温脱氧法和低度预氧化+热交联法,为制备高性能SiC纤维提供了一些参考.
参考文献
| [1] | Johnson D W;Evans A G;Goettler R W.Ceramic fibers and coatings:advanced materials for the twenty-first century[M].National Academy Press, Washington: D C, Publication,1998:1. |
| [2] | YAJIMA S;Hayasgi J;Iimura M.Synthesis of continous silicon carbide fiber with high tensile strength and high young' s modulus[J].Journal of Materials Science,1978:2569. |
| [3] | Le P;Monthioux M;Oberlin A .Understanding nicalon fiber[J].Journal of the European Ceramic Society,1993,11(02):95. |
| [4] | Laffon C;Flank A;Lagarde P.Study of nicalon-based ceramic fibers and powders by EXAFS spectrometry and some additional methods[J].Journal of Materials Science,1989:1503. |
| [5] | Bibbo S;Benson P;Pantano C.Effect of carbon monoxide partial pressure on the high-temperature decomposition of nicalon fiber[J].Journal of Materials Science,1991:5075. |
| [6] | Rachman C;Heuer H .Microstructural and mrochemical caracterization of slicon crbon and slicon crbonitride cramic fbers poduced from plymer pecursors[J].Journal of the American Ceramic Society,1988,71(03):132. |
| [7] | Bouillon E;Mocaer D;Villeneube F.Composition-microstructure-property relationships in ceramic monofilaments resulting from the pyrolysis of a polycarbosilane precursor[J].Journal of Materials Science,1991:1517. |
| [8] | Okamura K;Sato M.A study on the electron irradiation curing mechanism of polycarbosilane by solid-state 29Si high-resolution nuelear magnetic resonance spectroscopy[J].Journal of Materials Science Letters,1988:209. |
| [9] | Okamura K;Seguchi T.Application of radiation curing in the preparation of polycarbosilane derived SiC fibers[J].Journal of Inorganic and Organometallic Polymers,1992(02):171. |
| [10] | Sugimoto M.;Okamura K.;Seguchi T.;Shimoo T. .REACTION MECHANISMS OF SILICON CARBIDE FIBER SYNTHESIS BY HEAT TREATMENT OF POLYCARBOSILANE FIBERS CURED BY RADIATION .1. EVOLVED GAS ANALYSIS[J].Journal of the American Ceramic Society,1995(4):1013-1017. |
| [11] | Ishikawa T .Recent development of the SiC fiber nicalon and its composites, Including properties of the SiC fiber hinicalon for ultra-high temperature[J].Composites Science and Technology,1994,51:135. |
| [12] | Mocaer D;Richard C et al.Si-C-N ceramics with high microstructural stability elaborated from the pyrolysis of new polycarbosilazane precursors[J].Journal of Materials Science,1993,28:2615. |
| [13] | 楚增勇,宋永才,许云书,傅依备.聚碳硅烷强化辐射交联的研究[J].高分子材料科学与工程,2000(05):116-119. |
| [14] | Chu Z Y;Song Y C;Xu Y S .Enhanced irradiation cross-linking ofpolycarbosilane[J].Journal of Materials Science Letters,1999,18:1793. |
| [15] | Hasegawa Y .New curing method for polycarbosilane with unsaturated hydrocarbons and application to thermally stable SiC fibre[J].Composites Science and Technology,1994,51:161. |
| [16] | 李伟 .化学气相交联法制备低氧含量碳化硅纤维[D].长沙:国防科技大学,2001. |
| [17] | Feng Cao;Li Xiao dong;Ping Peng.Structural evolution and associated properties on conversion from Si-C-O-Al ceramic fibers to Si-C-Al fibers by sintering[J].Journal of Materials Science Chem,2002:1. |
| [18] | Feng Cao;Dong pyo Kim;Jae ho Ryu;Li Xiao dong .Modification of polycarbosilane as a precursor with high ceramic yield for oxygen-free SiC fibers[J].Korean Journal of Chemical Engineering,2001,18(05):761. |
| [19] | Lipowitz J;Barnard T et al.[P].J US Patent,4,743,662,1988,109(42):570. |
| [20] | 舟山澈;etal .[J].Journal of the Ceramic Society of Japan,1995,103(05):424. |
| [21] | William T;Christopher D et al.Polymer-derived silicon carbide fibers with low oxygen content and improved thermomechanical stability[J].Composites Science and Technology,1994,51:145. |
| [22] | 王亦菲,郑春满,李效东,范真祥,王军,陈革.热交联法制备低含氧量碳化硅纤维初步研究[J].国防科技大学学报,2002(03):94-97. |
| [23] | 郑春满,朱冰,李效东,王亦菲.聚碳硅烷纤维的热交联研究[J].高分子学报,2004(02):246-250. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%