欢迎登录材料期刊网

材料期刊网

高级检索

总结了钛合金的氢处理工艺方法,综述了氢在钛合金中的基本效应,以及氢对钛合金的组织结构和力学性能的影响规律及其机理.

参考文献

[1] 彭艳萍.国外航空钛合金的发展应用及其特点分析[J].材料工程,1997(10):3.
[2] R. J. Elias;H. L. Corso;J. L. Gervasoni .Fundamental aspects of the Ti-H system: theoretical and experimental behaviour[J].International journal of hydrogen energy,2002(1):91-97.
[3] 曹建玲,沈保罗,高升吉,蒋有荣,何晓.Ti-Al-Zr合金的氢致延迟断裂行为[J].中国有色金属学报,2002(z1):74-77.
[4] Briant C L;Wang Z F;Chollocoop N .Hydrogen embrittlement of commercial purity titanium[J].Corrosion Science,2002,44:1875-1888.
[5] 侯红亮,李志强,王亚军,关桥.钛合金热氢处理技术及其应用前景[J].中国有色金属学报,2003(03):533-549.
[6] O.N. Senkov;F.H. Froes .Thermohydrogen processing of titanium alloys[J].International journal of hydrogen energy,1999(6):565-576.
[7] 韩明臣.钛合金的热氢处理[J].宇航材料工艺,1999(01):23-27.
[8] Senkov O.N.;Jonas J.J. .Recent Advances in the Thermo hydrogen Processing of Titanium Alloys[J].JOM,1996(7):42-47.
[9] The Kinetics of Hydrogen Diffusion in Ti3Al-Based Alloy[J].JOURNAL OF SHANGHAI UNIVERSITY,1997(03):249.
[10] Chen Yexin;Wan Xiaojing.Hydrogen effects on the mechanical properties of Ti - 24Al - 11 Nb - 3V - 1 Mo alloy[J].Journal of Materials Science and Technology,1998(14):176-178.
[11] Wang W E.Thermodynamic evaluation of the titanium-hydrogen system[J].Journal of Alloys and Compounds,1996(238):6-12.
[12] Zhang Y;Zhang S Q .Hydrogenation characteristics of Ti -6Al -4V cast alloy and its microsoftructural modification by hydrogen treatment[J].International Journal of Hydrogen Energy,1997,22(2-3):161-168.
[13] SENKOV O N;Jonas J J .Effect of phase composition and hydrogen level on the deformation behavior of titanium-hydrogen alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1995,27A:1869-1876.
[14] Hirofume Yoshimura;Kin' ichi Kimura et al.Ultrafineequiaxedgrainrefinementandimprovementofmechanicalpropertiesof(α+β)typetitaniumalloysbyhydrogenation,hotworking,heattreatment[J].Materials Transactions,1994,35:266-272.
[15] M. NIINOMI;B. GONG;T. KOBAYASHI .Fracture Characteristics of Ti-6Al-4V and Ti-5Al-2.5Fe with Refined Microstructure Using Hydrogen[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1995(5):1141-1151.
[16] Kohn D H;Ducheyne P .Microstructural refinement of sintered and Ti-6Al-4V porous-coated by temporary alloying with hydrogen[J].Journal of Materials Science,1991,26(02):534-544.
[17] 宫波,赖祖涵,新家光雄,小林俊郎.用热化学处理改善(α+β)型钛合金的组织和力学性能[J].中国有色金属学报,1994(03):86-89.
[18] 宫波;新家光雄;小林俊郎 等.水素を用いた化學熱處理によるα+β型チタン合金のミクロ組織御と強韌性[J].轻金属,1992,42:638-643.
[19] O. N. Senkov;B. C. Chakoumakos;J. J. Jonas;F. H. Froes .Effect of temperature and hydrogen concentration on the lattice parameter of beta titanium[J].Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,2001(7-8):1431-1440.
[20] 王天生;廖波;杨柯 等.氢对亚临界固溶Ti3Al基合金时效组织的影响[J].兵器材料科学与工程,1995,18(02):58-62.
[21] 丁桦;路贵民;张彩碚 等.氢处理对Ti3Al金属间化合物组织和性能的影响[J].材料科学与工艺,1998,6(04):55-58.
[22] 张勇;张少卿;陶春虎 .氢化Ti-25Al-10Nb-3V-1Mo铸态合金的热压缩行为及其显微组织的影响[J].金属学报,1996,6(01):235-240.
[23] M. A. Murzinova;G. A. Salishchev;D. D. Afonichev .Formation of nanocrystalline structure in two-phase titanium alloy by combination of thermohydrogen processing with hot working[J].International journal of hydrogen energy,2002(7/8):775-782.
[24] 吉村博文;木村欽一;林正之 等.水素吸時效脫水素處理にょるα+β型チタン合金の等軸超細粒化[J].日本金属学会志(日本),1991,55:1375-1381.
[25] Hirofumi Yoshimura .Mezzoscopic grain refinement and improved mechanical properties of titanium materials by hydrogen treatments[J].International Journal of Hydrogen Energy,1997,22(2-3):145-150.
[26] Hirofumi Yoshimura;Jun Nakahigashi .Ultra-fine-grain refinement and superplasticity of titanium alloys obtained through protium treatment[J].International journal of hydrogen energy,2002(7/8):769-774.
[27] Hirofumi Yoshimura;Jun Nakahigashi.Tensile and impact properties of mesoscopic-grained (α + β) type titanium alloys obtained through hydrogen treatments[J].Journal of Alloys and Compounds,1999:293-295;858-861.
[28] MURZINOVA M A;Mazurski M I;Salishchev G A;Afonichev D D .Application of reversible hydrogen alloying for formation of submicrocrystalline structure in (α + β) titanium alloys[J].International Journal of Hydrogen Energy,1997,22(2-3):201-204.
[29] Trefilov V I;Timofeevam I I;Klochkov L I et al.Effects of temperature change and hydrogen content on titanium hydride crystal lattice volume[J].International Journal of Hydrogen Energy,1996,21(1-12):1101-1103.
[30] Peter Zwigl;David C. Dunand .Internal-stress plasticity in titanium by cyclic alloying/dealloying with hydrogen[J].Journal of Materials Processing Technology,2001(3):409-417.
[31] Evans W J;Bache M R .Hydrogen and fatigue behaviour in a near alpha titanium alloy[J].Scripta Metallurgica et Materialia,1995,32:1019-1024.
[32] 张勇,张少卿,陶春虎.氢对锻态Ti-25Al-10Nb-3V-1Mo合金热压缩行为的影响[J].中国有色金属学报,1996(01):84-88.
[33] Kohn D H;Ducheyne P .Tensile and fatigue strength of hydrogen-treated Ti-6Al-4V alloy[J].Journal of Materials Science,1991,26(02):328-334.
[34] Zhang H.;Xu JL.;Wang SH.;Lam TF. .THE EFFECT OF HYDROGEN ON THE STRENGTH AND SUPERPLASTIC DEFORMATION OF BETA-TITANIUM ALLOYS[J].Journal of Materials Science,1996(22):6105-6111.
[35] Zhang Yong;Zhang Shaoqing .Hydrogen effects on high temperature deformation characteristics of a cast Ti-14Al-19Nb-3V-2Mo alloy[J].Scripta materialia,1997(9):1315-1321.
[36] Teter D F;Robertson I M;Birnbaum H K .The effects of hydrogen on the deformation and fracture of β-titanium[J].Acta Materialia,2001,49:4313-4323.
[37] O.N. SENKOV;M. DUBOIS;J.J. JONAS .Elastic Moduli of Titanium-Hydrogen Alloys in the Temperature Range 20℃ to 1100℃[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1996(12):3963-3970.
[38] O.N.SENKOV;J.J. JONAS .Dynamic Strain Aging and Hydrogen-Induced Softening in Alpha Titanium[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1996(7):1877-1887.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%