SiCp/Al的熔化焊及高能束焊研究现状

宇航材料工艺 , 2005, 35(4): 19-24. doi: 10.3969/j.issn.1007-2330.2005.04.004

SiCp/Al的熔化焊及高能束焊研究现状

郭绍庆 ^1, , 袁鸿 ^2, , 谷卫华 ^3, , 李艳 ^4, , 李晓红 ^5,

1.北京航空材料研究院,北京,100095

2.北京航空材料研究院,北京,100095

3.北京航空材料研究院,北京,100095

4.北京航空材料研究院,北京,100095

5.北京航空材料研究院,北京,100095

基金项目: 航空基金(00H21013)

关键词：铝基复合材料 , SiCp/Al , 熔化焊 , 电子束焊 , 激光焊

Current Research Situation of Welding of SiCp/Al Composites

针对SiCp增强铝基复合材料(SiCp/Al)的熔化焊接,尤其是高能束焊接,围绕焊缝成形、有害相Al4C3生成、焊接气孔等影响该类材料焊接质量的若干问题,从形成机理、影响因素、控制措施等方面,综述了该领域的研究现状,指出了今后的研究方向.

参考文献

[1]	Lienert T J.Microstructural development in laser and electron beam welds on A356/SiC/15P[A].Cincinnati Ohio USA,1996:33-54.
[2]	夏德顺.铝基复合材料焊接研究述评[J].导弹与航天运载技术,1999(06):38-46.
[3]	Thaw C .MMC microwave packaging components[J].SAMPE Journal,1987,23(11):40-43.
[4]	苏世民.高密度、高性能IC封装的现状未来发展趋势及今后的对策[J].半导体技术,1994(04):64.
[5]	Carl Zweben .Advances in composite materials for thermal management in electronic packaging[J].JOM,1998(6):47-51.
[6]	饶勤 .从F-22看第四代战斗机机载设备制造技术[J].航空周刊,1996,30:1-3.
[7]	Ellis M B D .Joining of aluminum based metal matrix composites[J].International Materials Reviews,1996,41(02):41-58.
[8]	隋贤栋,罗承萍,欧阳柳章,骆灼旋.SiCp/ZL109复合材料中SiC的界面行为[J].复合材料学报,2000(01):65-70.
[9]	Stefanescu D M;Dhindaw B K;Kacar A S et al.Behavior of ceramic particles at the solid-liquid metal interface in metal matrix composite[J].Metallurgical and Materials Transactions,1988,19:2847-2855.
[10]	张坤,陈光南.激光作用下SiCp/A356复合材料的快凝组织形成[J].复合材料学报,2000(01):115-118.
[11]	Lean P P;Gil L;Urena A.Dissimilar welds between unreinforced AA6082 and AA6092/SiC/25p composites by pulsed-MIG arc welding using unreinforced filler alloys (Al-5Mg and Al-5Si)[J].Journal of Materials Processing Technology,2003:846-850.
[12]	R.Y. HUANG;S.C. CHEN;J.C. HUANG .Electron and Laser Beam Welding of High Strain Rate Superplastic Al-6061/SiC Composites[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(10):2575-2584.
[13]	Reynolds G H et al.Plasma joining of metal matrix composites[R].Rep ARO - 22817 6 - MS - S Army Research Office Triangle Park NC,1988.
[14]	Busch W B.Electron beam and friction welding of metal-matrix composites[A].Bordeaux France Woodhead Publishing CB16AH UK,1993:545-551.
[15]	Lienert T J et al.Laser and electron beam welding of SiCp reinforced aluminum A - 356 metal matrix composites[J].Scripta Metallurgica et Materialia,1993,28:1341-1346.
[16]	Zhang Deku,Chen Yanbin,Niu Jitai,Ji Guojuan.Mechanism of laser welding of SiC reinforced LD2 aluminum metal matrix composite[J].中国焊接,2001(02):140-144.
[17]	American Welding Society.Welding Handbook. Vol.3. Materials and Applications-Part1[J].Materials and Applications,1996:377-378.
[18]	Pan J.An analysis for welding processing and properties of SiC/Al composites[A].Tokyo Japan Materials Research Society,1998:14-23.
[19]	Wang H M;Chen Y L;Yu L G .In-situ weld-alloying/laser beam welding of/6061Al MMC[J].Materials Science and Engineering,2000,293:1-6.
[20]	陈彦宾,张德库,牛济泰,冀国娟.激光焊接铝基复合材料钛的原位增强作用[J].应用激光,2002(03):320-322,338.
[21]	陈永来,于利根,王华明.合金化填充材料Ni对SiCP/6061Al复合材料激光焊接焊缝显微组织的影响[J].复合材料学报,2000(04):63.
[22]	Warren R;Anderson C H .Silicon carbide fibers and their potential for use in composite materials[J].Composites,1984,15:101-111.
[23]	Laurent V;Chatain D;Eustathopolous N J .Wettability of SiC by aluminum and Al - Si alloys[J].Materials Science,1987,22:244-250.
[24]	Hashim J;Looney L;Hashim M S J .The wettability of SiC particles by molten aluminum alloy[J].Journal of Materials Processing Technology,2001,119:324-328.
[25]	Murty B S;Thakur S K;Dhindaw B K .On the infiltration behavior of Al, Al - Li, and Mg melts through SiCp bed[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2000,31:319-324.
[26]	M.I.P.Canul;R.N.Katz .Optimum parameters for wetting silicon carbide by aluminum alloys[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2000(2):565-573.
[27]	Kelly A;Mileiko S T.Handbook of Composites[M].Elsevier Science Publishers,1984
[28]	Laurent V;Chatain D;Eustathopolous N .Wettability of SiO2 and oxidized SiC by aluminum[J].Materials Science and Engineering A,1991,135:89-94.
[29]	JAE-CHUL LEE;JAE-PYOUNG AHN;ZHONGLIANG SHI .Methodology to Design the Interfaces in SiC/Al Composites[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(6):1541-1550.
[30]	Jae-Chul Lee;Jae-pyoung Ahn;Zhongliang Shi et al.Modification of the interfaces in SiC/Al composites[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2000,31:2361-2368.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

SiCp/Al的熔化焊及高能束焊研究现状

Current Research Situation of Welding of SiCp/Al Composites

参考文献