针对钛合金激光焊接的气孔问题进行了研究,对不同工艺参数下钛合金自熔激光焊接试样中的气孔数量及分布进行了金相观察,并进行了酸洗试样的对比试验.研究结果表明:钛合金未穿透激光焊接过程会形成气孔,酸洗对气孔的形成没有明显影响.根据气孔的位置分布及尺寸大小,提出将钛合金激光焊接气孔分为Ⅰ型气孔和Ⅱ型气孔,并阐述了未穿透激光焊接过程中Ⅰ型气孔形成的机理.
参考文献
[1] | Kutsuna M;Suzuki J;Suqiyama S et al.CO2 laser welding of A2219,A5083 and A6063 aluminium alloys[J].Welding in the World,1993,31(02):126-135. |
[2] | Akira Matsunawa;Seiji Katayama .Understanding physical mechanisms in laser welding for construction of mathematical model[J].Welding in the World: Journal of the International Institute of Welding: Journal of the International Institute of Welding,2002(Suppl.):27-38. |
[3] | 雷华东,黄文荣,郭鹏,余洋.抗氢不锈钢的激光焊接性及气孔成因初探[J].焊接技术,2002(03):8-10. |
[4] | 张旭东,陈武柱,芦田荣次,松田福久.CO2气体保护的激光焊接12mm厚低碳钢板[J].焊接学报,2002(06):51-54,61. |
[5] | M. H. Cho;D. F. Farson;J. I. Kim .Control of chaos in laser-induced vapor capillaries[J].Journal of laser applications,2003(3):161-167. |
[6] | 杜汉斌 .钛合金激光焊接及其熔池流动场数值模拟[D].华中科技大学,2004. |
[7] | 孙承纬.激光辐照效应[M].北京:国防工业出版社,2002:155-178. |
[8] | Sudnik W.;Erofeew W.;Radak D. .Computerized simulation of laser beam weld formation comprising joint gaps[J].Journal of Physics, D. Applied Physics: A Europhysics Journal,1998(24):3475-3480. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%