综述了C/C复合材料CVI工艺数值模拟的基本原理,软计算在工艺优化与控制的应用,以性能模拟的研究现状;分析了现今模拟存在的问题;提出了今后C/C复合材料计算机模拟的发展方向.
参考文献
[1] | 侯向辉,李贺军,刘应楼,康沫狂.先进陶瓷基复合材料制备技术-CVI法现状及进展[J].硅酸盐通报,1999(02):32-36. |
[2] | Buckley J D;Edie D D.Carbon-Carbon Materials and Composites[M].New Jersey:Noyes Publication,1993:1-17. |
[3] | Vaidyaraman S.;Agrawal PK.;Starr TL.;Lackey WJ. .1-D MODEL FOR FORCED FLOW-THERMAL GRADIENT CHEMICAL VAPOR INFILTRATION PROCESS FOR CARBON/CARBON COMPOSITES[J].Carbon: An International Journal Sponsored by the American Carbon Society,1996(9):1123-1133. |
[4] | Hou Xianghui;Li Hejun;Chen Yixi .Modeling of chemical vapor infiltration process for fabrication of carbon-carbon composites by finite difference methods[J].Carbon: An International Journal Sponsored by the American Carbon Society,1999(4):669-677. |
[5] | 侯向辉,李贺军,李克智,姜开宇,康沫狂.单向碳/碳复合材料CVI致密化模拟研究[J].复合材料学报,1999(02):129-134. |
[6] | 顾正彬,李贺军,李克智,李爱军.碳/碳复合材料等温CVI工艺有限元模拟及可视化研究[J].西北工业大学学报,2003(03):360-363. |
[7] | 姜开宇,李贺军,侯向辉,李克智.轴对称C/C复合材料件等温CVI过程的数值模拟研究[J].西北工业大学学报,2000(04):665-668. |
[8] | 李爱军 .碳/碳复合材料性能预测与ICVI工艺系统虚拟设计[D].西安:西北工业大学,2004. |
[9] | 姜开宇,李贺军,李克智.C/C复合材料热梯度CVI工艺的数值模拟研究[J].复合材料学报,2000(04):84. |
[10] | LI Kezhi,LI Hejun,JIANG Kaiyu,HOU Xianghui.Numerical simulation of isothermal chemical vapor infiltration process in fabrication of carbon-carbon composites by finite element method[J].中国科学E辑(英文版),2000(01):77-85. |
[11] | Starr T L;Smith A W.Modelling of chemical vapor infiltration for ceramic and carbon matrix composites[A].Structural Carbons,1992:219-233. |
[12] | Mcallister P;Wolf E E .Simulation of a multiple substrate reactor for chemical vapor infiltration of pyrolytic carbon with carbon-carbon composites[J].AICHE Journal,1993,39(07):1196-1209. |
[13] | 姜开宇,李贺军,李克智.2D碳/碳复合材料CVI过程的数值模拟研究[J].宇航学报,1999(04):104-107. |
[14] | Narayana Birakayala;Edward A. Evans .A reduced reaction model for carbon CVD/CVI processes[J].Carbon: An International Journal Sponsored by the American Carbon Society,2002(5):675-683. |
[15] | Zhang W;Huttinger K J.Simulation strudies on chemical vapor infiltration of carbon[J].Composites Science and Technology,2002:1947-1955. |
[16] | Zadeh L.A. .Soft computing and fuzzy logic[J].IEEE Software,1994(6):48-56. |
[17] | 张立明.人工神经网络的模型及应用[M].上海:复旦大学出版社,1993:1-10. |
[18] | 李爱军,李贺军,李克智,顾正彬.Modeling of CVI process in fabrication of carbon/carbon composites by an artificial neural network[J].中国科学E辑(英文版),2003(02):173-181. |
[19] | 顾正彬,李贺军,李克智,李爱军.C/C复合材料等温CVI工艺Mamdani模糊系统建模[J].材料研究学报,2003(04):375-379. |
[20] | 顾正彬,李贺军,李克智,史小红,李爱军.C/C复合材料等温CVI工艺T-S模糊系统研究[J].宇航学报,2004(01):119-122. |
[21] | 孙国岭,李贺军,张秀莲,齐乐华,杨斌.C/C复合材料TCVI工艺温度控制系统研究[J].材料科学与工程学报,2003(06):821-823. |
[22] | 姜开宇,李贺军,王敏杰.遗传算法在C/C复合材料等温CVI工艺参数优化中的应用[J].材料工程,2002(10):33-35,47. |
[23] | 顾正彬,李贺军,李克智,李爱军.碳/碳复合材料等温化学气相渗透工艺模糊系统建模[J].硅酸盐学报,2003(07):629-634. |
[24] | Li Aijun;Li Hejun;Li Kezhi .Applications of neural networks and genetic algorithms to CVI processes in carbon/carbon composites[J].Acta materialia,2004(2):299-305. |
[25] | Pierson H O;Lieberman M L.The chemical vapor deposition of carbon on carbon fibers[J].Carbon,1975(13):159-166. |
[26] | Savage G.Carbon-Carbon composites[M].London:Chapman and Hall,1993:319. |
[27] | R. Piat;E. Schnack .Hierarchical material modeling of carbon/carbon composites[J].Carbon: An International Journal Sponsored by the American Carbon Society,2003(11):2121-2129. |
[28] | R. PIAT;B. REZNIK;E. SCHNACK .Modeling of effective material properties of pyrolytic carbon with different texture degrees by homogenization method[J].Composites science and technology,2004(13/14):2015-2020. |
[29] | Piat R;Schnack E .Modeling the effect of microstructure on the coefficients of thermal expansion of pyrolytic carbon[J].CARBON,2003,41:2159-2179. |
[30] | J.W. Klett;V.J. Ervin .Finite-element modeling of heat transfer in carbon/carbon composites[J].Composites science and technology,1999(4):593-607. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%