针对重复使用运载器热防护系统纤维隔热毡内部导热和辐射的耦合换热问题进行了分析,应用有限差分法建立了纤维隔热毡的数值分析模型.通过数值求解传热方程,计算了稳态的有效热导率.计算结果表明辐射和气体传导是纤维隔热毡内的主要传热方式,辐射作用随压力和试样密度的增加而降低,在试样温度高的一侧辐射是主要的传热方式,而在温度低的一侧气体传导为主要的传热方式;试样的有效热导率随纤维的平均直径、压力和温差的增加而增加,随试样密度的增加而降低.本文的计算结果与文献中的实验结果吻合较好,可以为纤维隔热毡及热防护系统的优化设计提供理论参考.
参考文献
[1] | Dorsey J T;Poteet C C .Metallic thermal protection system technology development:concept[R].Requirements and Assessment Overview,AIAA,2002-0502 |
[2] | Gorton M P;Shideler J L;Webb G L .Static and aerothermal tests of a superalloy honeycomb prepackaged thermal protection system[J].NASA,1993,TP-3257(03):1-5. |
[3] | Jochen Marschall;Jesse Maddren;Jason Parks .Internal radiation transport and effective thermal conductivity of fibrous ceramic insulations[R].AIAA,2001-2822 |
[4] | Kamran Daryabeigi .Heat transfer in high-temperature fibrous insulation[R].AIAA,2002-3332 |
[5] | 斯帕罗E M;塞斯R D;顾传保;张学学.辐射传热[M].北京:高等教育出版社,1982:216-234. |
[6] | Kamran Daryabeigi .Analysis and testing of high temperature fibrous insulation for reusable launch vehicles[R].AIAA-99-1044,1999. |
[7] | Sullins A D;Kamran Daryabeigi .Effective thermal conductivity of high porosity open cell nickel foam[R].AIAA,2001-2819 |
[8] | Williams S D;Curry D M.Prediction of rigid silica based insulation conductivity using morphological data[A].Atlanta,Georigia,1993:21-28. |
[9] | Bankvall C .Heat transfer in fibrous materials[J].Journal of Testing and Evaluation,1968,1(01):235-243. |
[10] | 林瑞泰.多孔介质传热传质引论[M].北京:科学出版社,1995:119-128. |
[11] | Kamran Daryabeigi .Effective thermal conductivity of high temperature insulation for reusable launch cehicles[R].NASA/TM-1999-208972 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%