为了提高钛合金的表面耐磨性,利用氧乙炔热喷涂枪,在TC4合金表面上制备出镍包石墨涂层.采用MXP-2000型销盘式摩擦磨损实验机,进行钛合金及其镍包石墨涂层的干摩擦磨损实验,并利用扫描电镜对磨损表面进行观察和分析.实验结果发现,镍包石墨涂层的摩擦系数只有钛合金的一半左右,前者磨损量为后者的1/6,说明镍包石墨涂层可以大大提高钛合金的表面耐磨性能.TC4合金的磨损机制以黏着磨损为主,喷涂层的磨损机制以磨粒磨损为主,喷涂层中的石墨润滑相是其耐磨性高的主要原因.
参考文献
| [1] | Straffelini G.;Molinari A. .Dry sliding wear of Ti-6Al-4V alloy as influenced by the counterface and sliding conditions[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1999(1):328-338. |
| [2] | 孙荣禄,郭立新,董尚利,杨德庄.钛及钛合金表面耐磨热处理[J].宇航材料工艺,1999(05):15-19. |
| [3] | Meng Qingwu;Geng Lin;NI Dingrui .Laser cladding NiCoCrAlY coating on Ti-6Al-4V[J].Materials Letters,2005,59:2774-2777. |
| [4] | J. Rodriguez;A. Martin;R. Fernandez;J. E. Fernandez .An experimental study of the wear performance of NiCrBSi thermal spray coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2003(7/12):950-955. |
| [5] | Ghorbani M;Mazaheri M;Afshar A .Wear and friction characteristics of electrodeposited graphite bronze composite coatings[J].Surface and Coatings Technology,2005,190:32-38. |
| [6] | 李锐星,梁焕珍,喻克宁,白辰东,黎少华,于道成.制备细镍包石墨粉末的动力学[J].有色金属(冶炼部分),2002(05):37-39,42. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%