采用铸锭冶金法制备了 Al-6.0Zn-2.0Mg-0.12Zr 和 Al- 6.0Zn - 2.0Mg - 0.2Sc - 0.12Zr 两种合金板材,以 Al-Mg-Sc-Zr焊丝为焊接填充材料,对3 mm厚的上述两种合金板材进行氩弧焊接,之后对两种接头的显微组织和力学性能进行对比研究.结果表明:第一,微量Sc可以显著提高Al-Zn-Mg-Zr合金基材的拉伸性能,基材强度的提高来源于晶粒细化强化、Al3(Sc,Zr)粒子的析出强化和Al3(Sc,Zr)粒子引起的亚结构强化;第二,焊接过程中,不含 Sc 的合金焊接接头热影响区内η相(MgZn2)粒子和晶粒明显粗化,含 Sc的合金焊接接头热影响区内η相(MsZn2)粒子也明显粗化,但晶粒大小没有明显变化,由于Al3(Sc、Zr)粒子稳定性高,不容易粗化和团聚,对位错和亚晶界仍然起钉扎作用,热影响区仍然保持未再结晶组织,过时效软化现象相对于传统的铝镁合金来说不是很严重;第三,微量 Sc 可以明显提高 Al-Zn-Mg-Zr 合金焊接接头的强度,与不加 Sc 的合金焊接接头相比,添加Sc的合金拉伸强度从395 MPa提高到447 MPa,强度系数从 0.7 提高到0.8.强度的提高主要来源于晶粒细化强化、Al3(Sc,Zr)粒子的析出强化和由于Al3(Sc,Zr)粒子的高稳定性导致的的抗热循环软化能力的提高.
参考文献
| [1] | Marzena Lech-Grega;Sonia Hawrylkiewicz;Maria Richert .Structural parameters of 7020 alloy after heat treatment simulating the welding process[J].Materials Characterization,2001(2/3):251-257. |
| [2] | 姜锋,尹志民,黄伯云,贺跃辉,陈苏里.Homogenization and Recrystallization of Al-6Mg Alloys with and without Sc and Zr[J].稀土学报（英文版）,2004(05):600-603. |
| [3] | 陈苏里,姜锋,尹志民,雷学锋,聂波.含钪与不含钪铝镁钪合金焊接接头的组织与性能[J].中国有色金属学报,2006(05):835-840. |
| [4] | S. Lathabai;P.G. Lloyd .The effect of scandium on the microstructure, mechanical properties and weldability of a cast Al-Mg alloy[J].Acta materialia,2002(17):4275-4292. |
| [5] | 王生,李周,尹志民,周古昕,成建国.钪锆微合金化焊丝焊接头的组织与性能[J].兵器材料科学与工程,2005(03):26-29. |
| [6] | Selvi Dev a,A.Archibald Stuart a.Effect of scandium ad-ditions on microstructure and mechanical properties of Al-Zn -Mg alloy welds[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2007(02):1-7. |
| [7] | Riddle Y W;Hallem H;Ryum N .Highly recrystallization resistant Al-Mg-Mn alloys using Sc and Zr[J].Materials Science Forum,2002,396(01):563-568. |
| [8] | Riddle Y W;Hallem H;Ryum N .Highly recrystallization resistant Al-Mg-Mn alloys using SC and Zr[J].Materials Science Forum,2002,396(01):563-568. |
| [9] | 尹志民,杨磊,潘青林,姜锋.Effect of minor Sc and Zr on microstructures and mechanical properties of Al-Zn-Mg based alloys[J].中国有色金属学会会刊(英文版),2001(06):822-825. |
| [10] | 何振波.Al-Mg（Sc,Zr）合金焊接接头组织与性能试验研究[J].轻合金加工技术,2006(08):44-47. |
| [11] | Vladivoj Ocenasek;Margarita Slamova .Resistance to recrystallization due to Sc and Zr addition to Al-Mg alloys[J].Materials Characterization,2001(2):157-162. |
| [12] | Gaofeng Fu;Fuquan Tian;Hong Wang .Studies on softening of heat-affected zone of pulsed-current GMA welded Al-Zn-Mg alloy[J].Journal of Materials Processing Technology,2006(1/3):216-220. |
| [13] | Ma T;Ouden G .Softening behaviour of Al-Zn-Mg al-loys due to welding[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1999,266:198-204. |
| [14] | Balasubramanian V V;Ravisankar G;Madhusudhan Reddy .Effect of pulsed current and pest weld aging treatment on tensile properties of argon arc welded high strength aluminium al-loy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2007,459:19-34. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%