实验研究了装配间隙对 GF/E 层合板螺栓连接性能的影响.在其它条件固定的情况下,选取了不同间隙,测试了装配间隙对螺栓连接强度的影响.实验结果表明:GF/E 层合板螺栓连接承载能力随着间隙的减小而增加,当间隙＜0.1 mm 时,螺栓连接强度达到稳定值.
参考文献
| [1] | 贾普荣;矫桂琼 .复合材料层压板挤压强度[J].宇航材料工艺,1997,27(03):48-50. |
| [2] | Buket Okutan;Zuleyha Aslan;Ramazan Karakuzu .A study of the effects of various geometric parameters on the failure strength of pin-loaded woven-glass-fiber reinforced epoxy laminate[J].Composites science and technology,2001(10):1491-1497. |
| [3] | Yi Xiao;Takashi Ishikawa .Bearing strength and failure behavior of bolted composite joints (part I: Experimental investigation)[J].Composites science and technology,2005(7/8):1022-1031. |
| [4] | Yi Xiao;Takashi Ishikawa .Bearing strength and failure behavior of bolted composite joints (part II: modeling and simulation)[J].Composites science and technology,2005(7/8):1032-1043. |
| [5] | Taner Yylmaz;Tamer Synmazcelik .Investigation of load bearing performances of pin connected carbon/polyphenylene sulphide composites under static loading conditions[J].Materials & Design,2007(1):520-527. |
| [6] | Alaattin Aktas;M. Husnu Dirikolu .An experimental and numerical investigation of strength characteristics of carbon-epoxy pinned-joint plates[J].Composites science and technology,2004(10/11):1605-1611. |
| [7] | H.A. Whitworth;M. Othieno;O. Barton .Failure analysis of composite pin loaded joints[J].Composite Structures,2003(2):261-266. |
| [8] | Aktas A;Dirikolu M H.The effect of stacking sequence of carbon epoxy compositelaminates on pinned-joint strength[J].Computers & Structures,2003(62):107-111. |
| [9] | Lanza D S F;Cappello F;Cloud G L.On the elastic behaviour of a cress-ply composite pin-joint with clearance fits[J].Journal of Thermoplastic Composite Materials,1999(12):13-22. |
| [10] | DiNicola A J;Fantle S L.Bearing strength behaviour ofclearance-fit fastener holes in toughened grap-hite/epoxy laminates[J].Composite Materials Testing and Design,1993(11):20-37. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%