反应性流体在纤维预制体(织物)中的流动行为对于优化工艺参数和模具设计、控制制品质量等具有重要意义.本文简述了RTM工艺的流体流动特点,介绍了RTM工艺过程中流体流动研究的理论基础,综述了RTM工艺中反应性流体流动的发展现状,并展望了其发展趋势.
参考文献
| [1] | 尹明仁,段跃新,李丹,梁志勇,张佐光.视窗化RTM 工艺充模过程模拟仿真技术研究[J].复合材料学报,2001(04):17-22. |
| [2] | 秦伟,李海晨,张志谦,吴晓宏.RTM工艺树脂流动过程数值模拟及实验比较[J].复合材料学报,2003(04):77-80. |
| [3] | Harber B D;Stab G H .Note an the effects of voids upon the hygral and mechanical properties of AS4/3502 graphite epoxy[J].Journal of Composite Materials,1987,21(03):280-288. |
| [4] | Gokee A;Hsiao K T;Advani S G .Branch and bound search to optimize injection gate locations in liquid composite molding process[J].Composites Part A:Applied Science and Manufacturing,2002,33:1 263-1 272. |
| [5] | Shojaei A;Ghaffarian S R;Karimian S M H .Numerical simulation of threc-dimensional mold filling processing in resin transfer molding using quasi-steady state and partial saturation formulation[J].Composites Science and Technology,2002,62:861-879. |
| [6] | Biekerton S;Stadffeld H C;Steiner K V et al.Design and application of actively controlled injection schemes for resin-transfer molding[J].Composites Science and Technology,2002,61:1 625-1 637. |
| [7] | Lin M Y;Murphy M J;Hahn H T .Resin transfer molding processing optimization[J].Composites PartA,2000,31:361-371. |
| [8] | 张刚翼,沈玉考.浅谈RTM工艺中对树脂流动性的控制[J].玻璃钢/复合材料,1999(05):10-12. |
| [9] | 黄家康.复合材料成型技术[M].北京:化学工业出版社,1999 |
| [10] | Shaw S J;Kinloch A J .Toughened bismaleimide adhesives[J].International Journal of Adheusion and Adhesives,1985,5(03):123-127. |
| [11] | Loos A C;MacRae J D .A process simulation model for the manufacture of a blade-stifened panel by the resin film infusion process[J].Composites and Technology,1996,56:273-289. |
| [12] | 江顺亮.RTM加工工艺充模过程的计算机模拟[J].复合材料学报,2002(02):13-17. |
| [13] | 晏石林,杨梅,谭华.树脂膜熔渗工艺及其数值分析方法[J].玻璃钢/复合材料,2004(02):33-35,48. |
| [14] | 贝尔;李竟生;陈希.多孔介质流体动力学[M].北京:中国建筑工业出版社,1998 |
| [15] | HAMMAMI A. .Analysis of the Vacuum Infusion Molding Process[J].Polymer Composites,2000(1):28-40. |
| [16] | 代晓青,肖加余,曾竟成,刘钧,尹昌平,刘卓峰.等温DSC法研究RFI用环氧树脂固化动力学[J].复合材料学报,2008(04):18-23. |
| [17] | Tucker C L .Heat transfer and reaction issues in liquid composite molding[J].Polymer Composites,1996,17(01):60-71. |
| [18] | 路遥,段跃新,梁志勇,张佐光.钡酚醛树脂体系化学流变特性研究[J].复合材料学报,2002(05):33-37. |
| [19] | Park J;Kang M K .A numerical simulation of the resin film infusion process[J].Computers & Structures,2003,60:431-437. |
| [20] | 邓京兰,王继辉,连军.RTM充模过程（Ⅰ）：数学模型的建立[J].武汉理工大学学报,2003(07):51-53,63. |
| [21] | 宋修官 .RTM工艺在线监控的研究[D].武汉理工大学,2006. |
| [22] | 李海晨 .树脂传递模塑工艺过程数值模拟与固化过程监测研究[D].哈尔滨工业大学,2002. |
| [23] | Reberedo M M;Rojas A J .Molding by reactive injection of reinforced plastics[J].Polymer Engineering and Science,1988,28(07):485-490. |
| [24] | Moon-Kwang U M;Woo IL LEE .A study on the mold filling process in resin transfer molding[J].Polymer Composites,1991,31(11):765-771. |
| [25] | Loos C A;Springer S G.Curing of epoxy matrix composites[J].Journal of Composite Materials,1983(17):135-169. |
| [26] | 树脂传递模塑过程的数学描述和数值模拟进展[J].材料研究学报,2005(05):449-456. |
| [27] | Bruschke M V;Advani S G .Numerical approach to model non-isothermal viscous flow through fibrous media with free surfaces[J].International Journal for Numerical Methods in Fluids,1994,19(07):575-603. |
| [28] | Chnn A W;Hwang S T .Modeling resin transfer molding of axisymmetric composite parts[J].Journal of Materials Processing & Manufacturing Science,1992,1(02):105-118. |
| [29] | Chan A W;Hwang S T .Molding resin transfer molding of polyimide (PMR-15)/fiber composites[J].Polymer Composites,1993,14(06):524-528. |
| [30] | James Lee L;Young W B;Lin R J .Mold filling and cure modeling of RTM and SRIM processes[J].Computers & Structures,1994,27(1-2):109-120. |
| [31] | Chang W;Kikuchi N .Analysis of non-isothermal mold filling process in resin transfer molding(RTM) and structural reaction injection molding(SRIM)[J].Computational Mechanics,1995,16(01):22-35. |
| [32] | Chang W;Kikuchi N .Analysis of composite molding using the homogenization method[J].International Journal of Computational Fluid Dynamics,1996,7(1-2):49-77. |
| [33] | Richard B;Dessonberger L;Tucker C .Mold filling and curing analysis in liquid composite molding[J].Polymer Composites,1995,16(06):495-506. |
| [34] | Ngo N D;Tamma K K .Non-isothermal three-dimensional developments and process modeling of composites:flow/thermal/cure formulations and experimental validations[J].Computer Modeling in Engineering and Sciences,2000,1(03):57-72. |
| [35] | Ngo N D;Tamma K K .Non-isothermal 2-D flow/3-D thermal' developments encompassing process modeling of composites:flow/thermal/cure formulation and validations[J].International Journal for Numerical Methods in Engineering,2001,50(07):1 559-1 585. |
| [36] | A. Shojaei;S.R. Ghaffarian;S.M.H. Karimian .Simulation of the three-dimensional non-isothermal mold filling process in resin transfer molding[J].Composites science and technology,2003(13):1931-1948. |
| [37] | Young W B;Han K;Liou M J .Flow simulation in molds with preplaced fiber mats[J].Polymer Compesites,1991,12(05):391-403. |
| [38] | Young W B .Three-dimensional non-isothermal mold filling simulation in resin transfer melding[J].Polymer Composites,1994,15(02):118-127. |
| [39] | Young W B .Thermal behaviors of resin and mold in the process of resin transfer molding[J].Journal of Reinforced Plastics and Compcsites,1995,14(04):310-331. |
| [40] | Young W B;Rupel K;Liou M J .Analysis of resin injection molding in melds with proplaced fiber mats.Ⅱ:numerical simulation and experiments of mold filling[J].Polymer Composites,1991,12(01):30-38. |
| [41] | Lin R;Lee L J;Liou M .Non-isothermal mold filling and curing simulation in thin cavities with preplaced fiber mats[J].International Polymer Processing,1991,4(05):356-369. |
| [42] | 陈仁良,桂冰,李明成,梁志勇.树脂传递成型工艺中树脂流动和凝固过程的非等温仿真[J].中国航空学报（英文版）,2003(04):247-252. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%